Sydney August Garage Sale

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Sydney August Garage Sale

Post by thrash »

Hi All,

Over the years I've collected a lot of stuff I realise I will never use, and as a result, the following things are up for sale. Please note that the prices listed are either what I have paid for them, what I would pay for them, what i've seen others pay for them, and if all else fails, an educated guess.. so.. if you see something you want, and want to offer a lower price, pm me, and I may consider it if it's reasonable :)

items are located in Parramatta - Sydney, NSW. Also able to post most of the stuff except perhaps the head and the giant intercooler, and definately not able to post the bench vise


Standard L300 manifold $180
Throttle body and fuel rail are included, but no injectors

Sohc high rpm double valve springs $100
You can have the head if you are local, but it's not in the best shape

Unmodded Sonata Manifold SOLD $180
Injectors are sonata injectors - these will need to be replaced for a turbo application. I originally paid 200 for this thing.

Standard Dash Cluster $100
just under 270k kms on the clock. Seems to be in ok condition.

Autometer Boost gaugeSOLD $50
liquid filled to prevent the needle from twitching/vibrating too much

Stock Intake Pipe $100
aka acordian hose. no rips that I can see, but the turbo end is a little worn as pictured

Sohc Spark plug leads $10
bosch units

550cc rx7 injectors $250
set of 4. i have never used or flow tested them. They have been sitting around for 2 years now

vr4 intercooler $100
one side painted black. as you can see from the picture, one of the inlets has a little dent

looong intercooler $100
this will just about fit between the chassis rails - very snug fit from memory (i checked when i bought it about a year ago now)

CA18 intercooler $30
standard side mount intercooler for a ca18 powered sylvia/180. My hand is in the picture so you know how puny it is

stock exhaust manifold $100
good condition - no cracks that I can see. This was in a stock car that had no exhaust leaks and made almost 100rwkw

bench vice/viseSOLD $100
is it vise or vice?? I've seen both spellings used, but that can't be right! Anyway, this was purchased from a mechanic that was shutting down a while back. never been used by me.. extremely heavy.. and judging by the hare and forbes website, these things cost 300+ new



Pictures are below. Apologies for the crap quality

L300 mani and double valve spring head
Image
Image

Sonata mani
Image
Image

instrument cluster
Image
Image
Image
Image

Autometer Boost Gauge - the line in the gauge is not a crack - it's the level of the liquid
Image

Intake Pipe
Image
Image

Sohc Spark plug leads
Image

550cc rx7 injectors
Image


vr4 intercooler
Image
Image
Image

looong intercooler
Image
Image
Image
Image
Image

CA18 intercooler
Image

stock exhaust manifold
Image
Image
Image
Image

bench vice/vise
Image
Last edited by thrash on Mon Aug 16, 2010 10:21 pm, edited 1 time in total.
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

what size is boost gauge? shipping cost?
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
Muz
[P] Plates
Posts: 38
Joined: Tue Jan 13, 2004 1:36 am
Location: Perth WA - Darlington

Sonata Manifold

Post by Muz »

I'll take the Sonata Manifold, PM sent.
cheers
Muz
JD Pristine condition. JA tarmac spec car.JB tarmac race car, JB ex Gp "A" car being reborn. Had Starions for 25 years.
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

bridgey wrote:what size is boost gauge? shipping cost?
diameter of boost gauge window is 2.5 inches.

shipping to NZ is aud 15.00 for standard airmail with no insurance and aud 20.00 for international registered post. pm me if you want it :)
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

correction, postage for the gauge is 11 or 16 aud, not 15 or 20.
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

bump. first post updated.
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

bump again :)
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

bump a couple of months later.. still a whole lot of stuff i don't need..
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
panda
Enthusiast
Posts: 680
Joined: Fri Apr 18, 2008 2:56 pm
Location: Mount Gambier, South Australia

Post by panda »

PM sent re intake pipe.
Dreams have no limits.

1982 JA - Ex Enthuzed
1982 JA - For Sale - pending
1983 JA - Ex Auto-cross car - being parted out
1983 JA - Being parted out
1984 JA - Rolling shell - For Sale
1985 JB - Rally car project
1985 JB - Autocross car
1985 JB - Week-end cruiser
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

pm replied to
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Gaswagon
Newcomer
Posts: 2
Joined: Thu Jul 22, 2010 9:09 pm
Location: Sydney

Post by Gaswagon »

Free bump

PM sent
SLEEPS
[L] Plates
Posts: 11
Joined: Mon Apr 19, 2010 11:53 pm
Location: Florida, USA

Post by SLEEPS »

Whats a price for the exhaust manifold shipped to USA? 32548 area code. It is a top mount turbo manifold, correct?
98eclipseGST.14B.megano2housing.FMIC.9psi.*weak*95mightymax.lookingforBOOST.
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

yeap, it's a top mount, rwd manifold :) I'll get a price for you.

Gaswagon, have pmed you, still awaiting response :)
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
SLEEPS
[L] Plates
Posts: 11
Joined: Mon Apr 19, 2010 11:53 pm
Location: Florida, USA

Post by SLEEPS »

Stupid question, because it is a top mount style, will I need to turn my turbo so the oil feed and oil drain lines are back to the stock locations... Being as my turbo was built for a standard down facing turbo manifold?
98eclipseGST.14B.megano2housing.FMIC.9psi.*weak*95mightymax.lookingforBOOST.
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

bump after a long time - still have some of this stuff lol
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests