New clutch installed

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
Johnyturbo
Big Dorifto
Posts: 90
Joined: Fri Feb 12, 2010 2:39 pm
Location: Poland, Warsaw

New clutch installed

Post by Johnyturbo »

New clutch is finally in, spent all weekend under the car but mission successful!
Anyone have any tips with bedding in new clutches? I was just going to take it real easy on it for the first 500km for a start but if anyone has any tips im more than happy to listen :D

ended up going with the xtreme clutch over the exedy ill be very interested to see how it go's

God it was such a bastard getting that gearbox back in sure glad that's all done :beer
Lummy
I love starions
Posts: 494
Joined: Sat Jun 07, 2008 9:58 am
Location: Victoria

Post by Lummy »

It can be a bloody big job hey!!

It gets easier when you've done it 4-5 times, but even then, it's still a big job.

A hoist and a gearbox cradle makes life easier again.

As for running it in - I just used mine (Exedy "sports tough") straight away like it was stolen. But then, mine's a dedicated track car.

Probably just go easy on it for 500kms like you say, then treat it as you normally would.
Johnyturbo
Big Dorifto
Posts: 90
Joined: Fri Feb 12, 2010 2:39 pm
Location: Poland, Warsaw

Post by Johnyturbo »

Lummy wrote:It can be a bloody big job hey!!

It gets easier when you've done it 4-5 times, but even then, it's still a big job.

A hoist and a gearbox cradle makes life easier again.

As for running it in - I just used mine (Exedy "sports tough") straight away like it was stolen. But then, mine's a dedicated track car.

Probably just go easy on it for 500kms like you say, then treat it as you normally would.
You are not wrong! it can take awhile, i decided to do the rear main, sprig bearing and rear gearbox seal + uni's (as they where pretty old and crusty) while i was at it so it took a bit longer than a normal clutch change, i figured it was most likely over due and well worth doing while i have it in bits , don't want to have to pull that apart again any time soon.

i would have killed for a hoist and cradle, much better than using a jack and rolling around under the car like a cretten rofl

ill just take it easy on her for a little bit then until it wears in.
Exedy make good gear, my last 2 clutches have been Exedy HD's in other cars (this is the first clutch i've installed myself though) and i've always been really happy with them. the xtreme clutch looks the goods and i have been told by a few people they are just as good as Exedy product. Cant wait to see how it compares.
Post Reply

Who is online

Users browsing this forum: No registered users and 51 guests