Sorry about the subject folks but would anyone know of a similar web site to this that tends to deal with the Lancer / Galants of the 1970's. I am after any information on the 4G32 twin cam engine that was released in the Colt Galant GTO around 1970 ish. I have one that has dropped a valve and taken out #3 piston and with a bit of time on my hands I've decided to rebuild it. The bottom end appears to be the same spec as a single cam engine but thats about it.
As usual any help appreciated.
Brian.
4G32 Twin Cam Engine
-
- Big Dorifto
- Posts: 89
- Joined: Fri Jan 09, 2004 7:33 pm
- Location: Melbourne, Eastern Subs
4G32 Twin Cam Engine
Dirt is for racing on, Bitumen is for getting there.
There is very little info out there on these rare engines and the normal place to go for info would be www.sigma-galant.com but at the moment the site is down.
There is also a little info on this website.
http://www.hoonboy.com/mitsutech.html
If you can get a hold of hoonboy he'd be able to give you a bit of info.
There is also a little info on this website.
http://www.hoonboy.com/mitsutech.html
If you can get a hold of hoonboy he'd be able to give you a bit of info.
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
- cheaterparts
- I love starions
- Posts: 351
- Joined: Mon Sep 27, 2004 7:36 pm
- Location: melbourne aust
Re: 4G32 Twin Cam Engine
Brian one of the guys on sigma/galant was selling a twin cam 4g32 the site has been downRallyStarion wrote:Sorry about the subject folks but would anyone know of a similar web site to this that tends to deal with the Lancer / Galants of the 1970's. I am after any information on the 4G32 twin cam engine that was released in the Colt Galant GTO around 1970 ish. I have one that has dropped a valve and taken out #3 piston and with a bit of time on my hands I've decided to rebuild it. The bottom end appears to be the same spec as a single cam engine but thats about it.
As usual any help appreciated.
Brian.
but I think I have his email address some where
PM sent
cheater
2.6 sigma IPRA spec
projects
E21 323 JPS bimmer
type 7 clone sports car
2.6 sigma IPRA spec
projects
E21 323 JPS bimmer
type 7 clone sports car
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
only contact i've had with one of those engines was a guy doing the QRC with one in an early lancer sedan back in the 90's. sounded absolutely incredible, had twin webers, full engine build. dont have any info sorry..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Who is online
Users browsing this forum: No registered users and 10 guests