Quickest Starions in Australia & NZ

redzone · Post by **redzone** » Fri Aug 24, 2007 5:59 pm

yeah its crazy hey LOL

be awesome if we were head to head :beer

rodhamp · Post by **rodhamp** » Thu Oct 11, 2007 8:01 pm

Another addition :)

Forged rods and pistons, GT2876R turbo with the 0.64 Exhaust housing on custom stainless exhaust manifold, 550cc injectors, L300 MPI with enlarged plenum, XF throttle body, mild port & polish on head, metal head gasket, balanced internals, lightened flywheel, haltech e6k, waste spark ignition, 2xRX7 intercoolers welded together through 2.5inch? piping, 3 inch exhaust all the way with straight through 3inch muffler, bosch 600hp fuel pump, finer filter air filter, camtech stage2 cam (part# says stage 3 but stats on card are for stage 2?!) think that's it....

Post by **TOMSUN** » Thu Feb 21, 2008 8:53 pm

FIRST PAGE TIMES UPDATED...

need a davebeks95 to post his time slip...
need et to 3 decimal places, mph and 60 ft times... :beer

http://forums.austarion.com/viewtopic.p ... 30&start=0

MR Bender · Post by **MR Bender** » Wed May 21, 2008 8:31 pm

ok here is mine iv only bin down to the drags once and this is how i went:
my best is 13.392 @ 106.6 mph.
my car has a evo 3 motor (un opened) with a fmic,3in exh, stock turbo ,microtech,680cc inj, 6puck xtream clutch kit,044 fuel pump 3.9lsd ,street tyres and 256bhp at 6100rpm on 18psi.

Show Image:

Show Image:

Post by **TOMSUN** » Thu May 22, 2008 10:15 pm

Nice!

Fisrt page has been updated :beer

davidbek95 · Post by **davidbek95** » Sat May 24, 2008 10:28 am

Just let you all know,That Mackay dragstrip will be open again very shortly
yes i will setting a fast time @ the strip,brendan will video the run,also a shot over the car to show it is a single cam 4g63 motor and there is no gas hooked up to it,all you see in the boot is my battery,the acceleration in my car is putting out,you have to be in it,brendan been in my car quite few times and he will say how quik it is,traction is my biggest problem.Keep you all posted.Yes i would love to take it the jamboree the hiring a trailer etc is another thing.The sad thing the car will be sold in a few months to a person that lives in rockhampton.As i am doing another project.
regards david

Post by **TOMSUN** » Sat May 24, 2008 6:50 pm

I can't wait... :D
Remember to post a pic of the time slip as I want to add your details to the first post.

eg..
E.T. to 3 decimal places
MPH to 2 decimal places
60ft times 3 decimal places

PS: the 302rwhp that your car has made... what boost was that made on??

:beer
Pete

davidbek95 · Post by **davidbek95** » Sun May 25, 2008 12:45 am

its running slightly bigger now,so there more hp there

Post by **TOMSUN** » Thu Oct 30, 2008 8:49 am

http://www.dragtimes.com/Mitsubishi--St ... acing.html

This is an interesting link

Post by **TOMSUN** » Thu Nov 13, 2008 8:59 am

First page updated

Post by **TOMSUN** » Wed Feb 03, 2010 11:09 am

Bump...

Anyone been to the drags lately?

MR Bender · Post by **MR Bender** » Wed Feb 03, 2010 1:13 pm

in a week i will go!

jk · Post by jk » Wed Feb 03, 2010 2:27 pm

Bender, I'm keen to come down and spectate, keep us posted on a firm race day

Noddy · Post by **Noddy** » Wed Feb 03, 2010 7:46 pm

Bender.... I could video?

MR Bender · Post by **MR Bender** » Wed Feb 03, 2010 9:37 pm

Noddy wrote:Bender.... I could video?

yer will let you know when i go

Ray you can video .

Austarion

Quickest Starions in Australia & NZ

drag time

Who is online