JAS's Rebuild and twincam conversion. 302kw atw baby!!!

Display your ride and post power figures, dyno runs, drag and circuit times.
Post Reply
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

OLD FART wrote:Hi Jason loved Mrs Tiger pics :D unfortunately somebody who lives here deleted them :(
I have been in contact with PALMSIDE in C/church and they are tring to come up with a Quaife lsd to fit our cars .As you are on the spot would you mind following this up .
If they do fit maybe with some minor machineing they appear to be a far better no maintainence unit
Cheers
Rad
lol Yes, very nice pics weren't they.

Sure thing Rad. I go there every now and then for Race Gas for my Bosses Race car.

Are you trying to get them for the small JA housing? Ive got one sitting in the man cave I could take in there for a measure up.

Shoot me the details at jp_prescott@hotmail.com
How much do they think they can do them for?

Jason
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
Top
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Ive got the new springs in the car and have driven it around a little. Still feels hard but way better than it was before. So I think Ill leave the 335lb/inch fronts and 275lb/inch rears as they are for the moment.

As you can see in the pic one page back Im using those sloted camber plates for the rears. Well I was. I dont recommend them to anyone. With these in they lock up the rear suspension solid at the top and make the body flex. I even had one of the nuts that hold them in place pop a thread. The thread was so badly damaged that I had to grind the nut off!
They also felt very harsh on the road when compared to the factory ones.
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
Top
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

JAS wrote: As you can see in the pic one page back Im using those sloted camber plates for the rears. Well I was. I dont recommend them to anyone.
were those mookeeh ones?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Top
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Yip. Think so.
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
Top
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

There's that name again. :roll:
Never argue with an idiot, it brings you down to their level and they beat you with experience.
Top
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

nobody likes that brand?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Top
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

OLD FART wrote:Hi Jason loved Mrs Tiger pics :D unfortunately somebody who lives here deleted them :(
I have been in contact with PALMSIDE in C/church and they are tring to come up with a Quaife lsd to fit our cars .As you are on the spot would you mind following this up .
If they do fit maybe with some minor machineing they appear to be a far better no maintainence unit
Cheers
Rad
I have a broken diff just sitting there if they need one for measurements
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
Top
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Yes I was going to do something about this this week. Alex, could you drop that diff in to my work at some stage. Would be good to have one to pull apart.
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
Top
User avatar
bridgey
Mine is bigger than yours
Posts: 311
Joined: Thu Dec 04, 2008 3:16 am
Location: Chrischurch

Post by bridgey »

where do you work and when? give me a text mate
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
Top
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Heres some pics from the South Island 4 and Rotors show and shine

Show Image: Image

Show Image: Image

Show Image: Image

Show Image: Image

Show Image: Image

Show Image: Image

Show Image: Image
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
Top
FST4RD
almost postwhore
Posts: 1223
Joined: Sat Dec 09, 2006 10:22 am
Location: Christchurch

Post by FST4RD »

Very nice! :drool:
Sold - 1987 Mitsubishi Starion GSR V DASH
Current - 1995 Subaru Legacy TT SW
- 1983 Mitsubishi Starion
Top
Lummy
I love starions
Posts: 494
Joined: Sat Jun 07, 2008 9:58 am
Location: Victoria

Post by Lummy »

Would love to hear about any progress on the quaife diff ?
Top
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Lummy wrote:Would love to hear about any progress on the quaife diff ?
Been way to busy. But should have some free time in the next week or so
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
Top
Lummy
I love starions
Posts: 494
Joined: Sat Jun 07, 2008 9:58 am
Location: Victoria

Post by Lummy »

No worries. Keep us updated - there's heaps of Starion owners that would love to have a high quality LSD.
Top
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Been a bit of a problem with my starion...
Its been getting the rest of the tune done.....
And its making 320hp atw at 18psi, which isn't as mush as it should be making at that psi. And the power curve isn't great either. Bit laggy and tappers off after 6000rpm. The tuner said it feels like its got a restiction somewhere in the system. We're pretty sure its my rangi Exhaust manifold. Tomorrow hes going to try it at 20psi, but seems to think it will only make another 20hp.

He said at 20psi it should be making 400hp atw!!! And thinks it will with a better manifold on it. Thats quite a bit of HP Im missing out on!!

Not to worried about it though, as I did have a niggling thought in the back of my mind that it could cause problems down the track. Ill either make a better manifold for it at some stage or have one made by some one.

Still 340hp at the wheels will be alot of fun :)

Heres a few pics of said "Rangi" Manifold

Show Image: Image

Show Image: Image

Show Image: Image
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
Top
Post Reply

Return to “Show And Go”

Who is online

Users browsing this forum: No registered users and 0 guests