QLD S.H.P widebody pics

Display your ride and post power figures, dyno runs, drag and circuit times.
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

the 'SHP' thing is a US term as that was an option or the 1988-89 versions in the US - adjustable shocks and wider wheels and tyres.

I haven't seen a JDM widey with the 8 and 9" stock wheels, but everyone that I have come across has had the adjustable shocks.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

Sweet. I will most likely be looking into it sometime this week. If I don't have them, I will most likely be the first you have come across and the most unlucky one :cry:
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

NXTIME wrote:Every JDM widey that I have seen has had them...so have a good look ;)
Even with my widey, I don't have the adjustable suspension! They might have been replaced with updated shocks,
but I don't think so... as it looks original.
The SSR wheels on my car were the equivalent of SHP wheels in Japan (7.5 front and 8.5in rear and I also have
5mm spacers on the rear!)
There is a post on the forum covering this.... stating the 8's & 9's were not available in the JDM, due to regulations
and some road tax?? So basically, this was only for the US market.

I now have SHP wheels. :D

Oh, and congratulations and welcome to the black widebody club! :beer
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

I thought yours had them, Mal? Well, then I sit corrected :D
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
MrBishi
nearly postwhore
Posts: 1683
Joined: Fri Jan 09, 2004 9:11 am
Location: Seoul

Post by MrBishi »

Euro spec did not get the adjustable shocks either.
I'm pretty sure the SHP wide wheels are US market only.
4G63 - 87kg
4G54 - 107kg
tri26t
I love starions
Posts: 484
Joined: Fri Nov 26, 2004 7:19 pm
Location: townsville

A little info

Post by tri26t »

This sounds right .
http://www.tristarion.com/cms/content/view/42/29/

some info on (USA) SHP stuff.

Cheers:Phil.
TORQUES-CHEAP.
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

Well having a quick look at that, my RIMS aren't SHP. Are yours?

I want to remove the rim to look at mine, which is hard because my key is hard to get to. (Locking nut Key)
tri26t
I love starions
Posts: 484
Joined: Fri Nov 26, 2004 7:19 pm
Location: townsville

turner

Post by tri26t »

Well having a quick look at that, my RIMS aren't SHP. Are yours?

I want to remove the rim to look at mine, which is hard because my key is hard to get to. (Locking nut Key)
Hey WidebodyWoody, you can see the adjusters by turning
your right wheel full RIGHT or vise versa.
I dont have the 8" and 9" wheels, but if you know where I can
get some I`ll give you my 7"/8" set.

Cheers:Phil.
TORQUES-CHEAP.
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

ahahaha I never thought about that. I doubt that I have them otherwise I would have seen it by now, but I will check it out when I get home from work. Thanks. And unfortunately I don't know where you could get some from, maybe redzone knows.
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

You could buy them off Oscar-the-grouch in the US, but availability and (shipping) cost might be the prohibitive factor.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

i have a front pair of SHP struts here woody, i would swap with cash for your non SHP ones...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

was there ever a SHP rear set? Because I only really looked at the rear set on mine last time I checked, I didn't get time to check last night. But I may be interested. Maybe. depends on if they are good. I don't know exactly what they do yet :p Unless they change the stiffness of the suspension.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yeah they have fronts and rears. i only have fronts. havnt had them in a car, but they dont leak. they are externally adjustable shocks, so basically yes they change the stiffness.. i got them from charlie when i got the big lsd and 5 stud conversion, i believe he got them from oscar :beer
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

ok just checked my car, and I DON'T have them :cry:

I take it this has the shocks Inside them as a sealed unit still. I think I might just stick with mine if this is the case. But if the shocks are slightly separate from this unit, I will be Quite interested in it.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

i dont quite get what u mean, but the shp shocks are rebuildable yes..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests