Surge Tank Setup Including Hoses/Fittings $300
well yes and yes but at that price to get a great quality pump and all the gear to hook straight up is a top deal!
looking at a motec e48 to go in and get a hi mount steam pipe manifold made to hold a larger turbo, then injectors and the list goes on! :beer
looking at a motec e48 to go in and get a hi mount steam pipe manifold made to hold a larger turbo, then injectors and the list goes on! :beer
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
will do mate when its done i'll make a trip over to your wshop to see what else needs doing!! :)
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
yeew!
do it for sure mate, it'd be such a relief to know where your parts are and who has got their gemini driving, dole rorting, sharon rooting, powers ice drinking, flanny and trackpant wearing hands on our stuff.
oh by the way... i think there are some ok people around here somewhere... they all drive these really weird looking 80's sports cars...
do it for sure mate, it'd be such a relief to know where your parts are and who has got their gemini driving, dole rorting, sharon rooting, powers ice drinking, flanny and trackpant wearing hands on our stuff.
oh by the way... i think there are some ok people around here somewhere... they all drive these really weird looking 80's sports cars...
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
i watched cannonball run 2 the other day and doesn't it bring a tear to the eye!!
its even got mr larsen out of happy gilmore in it!!
its even got mr larsen out of happy gilmore in it!!
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
got the stuff today cusscuss and ran some put some fuel in the pumps then re plugged them.
once i rip out the subs i'll bolt it in!!!
thanks heaps for it mate it'll be put to good use! :beer
once i rip out the subs i'll bolt it in!!!
thanks heaps for it mate it'll be put to good use! :beer
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
you could say that!
after fixing the 100mm of slop in the steering with your steering box and some strut tops, its a toss up betwen motec or making a high mount setup... not that it really matters cos its all gonna get done eventually! :)
after fixing the 100mm of slop in the steering with your steering box and some strut tops, its a toss up betwen motec or making a high mount setup... not that it really matters cos its all gonna get done eventually! :)
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
should i laugh or cry?
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
Who is online
Users browsing this forum: No registered users and 11 guests