Dropping the tank but f**ck'n fuel line won't budge!

All technical questions and answers regarding starions, being modifications to maintenance.
User avatar
JPC
almost postwhore
Posts: 1016
Joined: Fri Feb 13, 2004 9:25 pm
Location: Perth, WA

Post by JPC »

bigd wrote:Cheers guys will do what JPC said I think - did you take the lines off to flare them or can you do the work while the lines are in place and car upon axle stands?

Cheers

David
I did it in situ, without removing the lines. A bit fiddly, but doable. Use a midget tube cutter to cut the steel line cleanly (and file if necessary), then do the flaring.
Starion nutter since 1988...
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Nosaki Faki wrote:Shouldn't be a problem to do it without removing the lines, I did some work for a brake/clutch guy many years and from memory the tool will fit in the palm of your hand.
The important thing is as JPC said you need a DOUBLE FLARE TOOL.
I think NF means this:
Image

Or more specifically this (yes, palm of hand included):
Image

:)

This little bugger plus a normal flaring tool will produce the double flare you require. They come in different sizes and will cost about $10 to buy just the one...you want one to suit 3/8" line.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests