Wheel choice help
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
Just a point to note, Nissan RWD cars from R30 onwards generally have a more positive offset of around +35mm and may not fit just right on a RWD Mitsubishi/Toyota.
RWD Toyota have a similar offset, except their centrebore hole size is smaller, so any Toyota specific rims may not fit our Mitsubishis.
These are just my findings through my experiences.
RWD Toyota have a similar offset, except their centrebore hole size is smaller, so any Toyota specific rims may not fit our Mitsubishis.
These are just my findings through my experiences.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
I don't think you mentioned.... do you have a 4 or 5 stud car?
If 5 stud just pinch a set of mint as looking 17's of a pre AU falcon and you'll be right as rain!
If your cars a 4 stud model... then I have no idea.
If 5 stud just pinch a set of mint as looking 17's of a pre AU falcon and you'll be right as rain!
If your cars a 4 stud model... then I have no idea.
Sold - 1987 Mitsubishi Starion GSR V DASH
Current - 1995 Subaru Legacy TT SW
- 1983 Mitsubishi Starion
Current - 1995 Subaru Legacy TT SW
- 1983 Mitsubishi Starion
I think you'll find that's R32 onwards. R31 stock rims are +20dirtygalant wrote:Just a point to note, Nissan RWD cars from R30 onwards generally have a more positive offset of around +35mm and may not fit just right on a RWD Mitsubishi/Toyota.
RWD Toyota have a similar offset, except their centrebore hole size is smaller, so any Toyota specific rims may not fit our Mitsubishis.
These are just my findings through my experiences.
Stock Toyota rims may have the small hole, a lot of aftermarket ones are larger.
I bought my 16's off a chick with a Mk4 Supra....4/5 x 114.3, +20 offset. Perfect fit.
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
shame you missed out on those 17 inch mahdi mesh wheels i was selling recently tom.
i had 0mm offset 9 inch wide rubber on the front of my white JB and they didnt scrape. had 2 degrees neg camber though.
IMO keep an eye on the drift forums tom, get something japanese with dish, NOTHING looks better!
i had 0mm offset 9 inch wide rubber on the front of my white JB and they didnt scrape. had 2 degrees neg camber though.
IMO keep an eye on the drift forums tom, get something japanese with dish, NOTHING looks better!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
They are EXACTLY the type of rims I want on my Eterna! 15s just seem that little bit small and I need something 8 or 9" wide in 4 stud, which seems impossible to find.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
Who is online
Users browsing this forum: No registered users and 8 guests