My MPI (caution big pictures)

DrDeath · Post by **DrDeath** » Sun Jul 06, 2008 2:36 pm

So you reccon just plumb the pcv to atmosphere through a breather filter instead of pressurising the head?

4gpwr · Post by **4gpwr** » Sun Jul 06, 2008 4:44 pm

If you want your motor to suck in fumes from the pcv you could plumb in a sealed catch can to try to prevent the oil entering the intake. Or vent the crank case fumes to atnosophere or to a catch can , or a oil retern to the sump , caution when putting a filter on the rocker cover, oil mist can cause a fire . I would peffer both outlets on rocker cover to be vented to a catch can with a filter on the can .

DrDeath · Post by **DrDeath** » Sun Jul 06, 2008 8:14 pm

I have a new catch can there for it I just havn't gotten around to fitting it and plumbing it up yet. Catch can on both the PCV and sump sounds like the best option.

redzone · Post by **redzone** » Mon Jul 07, 2008 7:58 am

unfortunately for legal reasons the pcv setup has to be sealed, so the top of the catch can has to go back to the intake pipe.. still if your catch can is working u get fk all into the engine.

4gpwr · Post by **4gpwr** » Fri Jul 11, 2008 5:47 pm

If a cop opens the bonnet you are fucked any way , a pcv is the least of your problems

redzone · Post by **redzone** » Sat Jul 12, 2008 1:55 am

not in qld, man. up here you can easily argue that a well setup multipoint injection will have better emissions than a 1982 single point, which is true....

JD_Stazza_Brendan · Post by **JD_Stazza_Brendan** » Sat Jul 12, 2008 8:26 am

A well tuned MPI setup with the basic emmision gear fitted will blow the stock emission levels away.

4gpwr · Post by **4gpwr** » Sat Jul 12, 2008 10:56 am

In Vic , any aftermaket computer is very exp to make legal , pass or fail , what about ADRs , What about holes in the rad support for the pipe work , if you guys can get mods like that past the law , shit I'll sell my house and move up there .

redzone · Post by **redzone** » Sat Jul 12, 2008 1:27 pm

yep we can, as long as its done properly. and remember vic is the only state with expensive epa testing, nsw for example is inexpensive and a lot less nasty a process to go through. we dont have epa testing at this stage.

4gpwr · Post by **4gpwr** » Sat Jul 12, 2008 5:22 pm

Looks like I want to move up there , Redzone would you give me a try in the workshop ? LOL

redzone · Post by **redzone** » Sat Jul 12, 2008 11:19 pm

hahahaha i've done it now another starion heading to queensland :)

DrDeath · Post by **DrDeath** » Fri Aug 29, 2008 5:40 am

done some more work on it last weekend :) here's some piccys

thrash · Post by **thrash** » Fri Aug 29, 2008 10:38 am

no sheath for the fuel pump?

DrDeath · Post by **DrDeath** » Fri Aug 29, 2008 4:40 pm

sheath? Do you mean the black plastic shield that goes over the lot or the rubber thingy that goes between the pump and the clamp that holds it on, caus i did put some thin rubber between the pump and the clamp.

silo · Post by **silo** » Fri Aug 29, 2008 5:49 pm

Lookin great, love the cooler pipes :beer

Silas

Austarion

My MPI (caution big pictures)

pcv

pcv

leagal

epa

Who is online