Cheaper Substiture Than LSD?
Cheaper Substiture Than LSD?
Hi guys, Im wondering if there is a cheaper substitute for 2 wheel spinners rather than having an LSD diff.
Because I know with cars which dont have IRS (independent rear suspension) you can buy a spool or have the diff welded together but because Starions have IRS it makes it more dificult.
Does anyone have a different solution, or is there a different diff which fits on a Starion which is LSD and cheaper to come by?
Thanks guys
James
Because I know with cars which dont have IRS (independent rear suspension) you can buy a spool or have the diff welded together but because Starions have IRS it makes it more dificult.
Does anyone have a different solution, or is there a different diff which fits on a Starion which is LSD and cheaper to come by?
Thanks guys
James
Being independent doesn't make any difference. Your options are pay 700~1000 for an LSD, or weld the diff gears up. But be warned, locked diffs are illegal and also a major handful in the wet if you haven't driven on one before. Also, turning sharp corners i.e. 3 point turn, parking puts excessive amounts of stress on driveshafts/CV's and they will eventually break
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
The diff in a Starion can be welded. But its Illegal, can be a bitch to drive(especially parking, driving in city centres) and will wear out parts quicker or break them.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
They could break 5 minutes after you weld the diff. All depends on their current condition, how hard you drive it and the surfaces its driven on.
It may last years driven on gravel/dirt in a rally application but only last a few weeks driven on a hard road.
It may last years driven on gravel/dirt in a rally application but only last a few weeks driven on a hard road.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
Im not saying im going to do it, but im wondering are CV's and Driveshafts expensive?
So you reckon that the CV's and Driveshafts will only last a few weeks?
I used to have a VN commodore, and my mate who works in a diff company was going to weld the gears together and he said that they wouldnt break for years if they were to break at all. Isnt that the case?
So you reckon that the CV's and Driveshafts will only last a few weeks?
I used to have a VN commodore, and my mate who works in a diff company was going to weld the gears together and he said that they wouldnt break for years if they were to break at all. Isnt that the case?
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
VN's have live axle, Meaning no CV's , They arnt IRS. No one will be able to tell you for sure how long they will last.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-
- I like starions more
- Posts: 152
- Joined: Wed May 04, 2005 11:26 pm
- Location: Gold Coast
hey guys,
i have been in a few cars with lockers solid rear that arnt to bad to drive even in the wet.but my starion (irs of cause) is by far the worst its horrible to drive it bucks really bad at low speed obvisously the slower the worst. Its comin out of the car it s that bad i would be surpised if the axles lasted a year in one, but on the other hand i know another guy with a starion with a locker and he reckons it s fine. my advise dont do it but its your call!
i have been in a few cars with lockers solid rear that arnt to bad to drive even in the wet.but my starion (irs of cause) is by far the worst its horrible to drive it bucks really bad at low speed obvisously the slower the worst. Its comin out of the car it s that bad i would be surpised if the axles lasted a year in one, but on the other hand i know another guy with a starion with a locker and he reckons it s fine. my advise dont do it but its your call!
GO HARD OR GO HOME
I see it like this, spend out the money on an a LSD and it's a fit and forget part more or less taking in to consideration oil changes. OR weld up the original and be replacing parts every year or so (no one buys a turbo car and NEVER gives a boot full every now and again) I think the cost of constant replacement, the time it'll take you to constantly be doing it or worse paying someone else to do it you'll wish you'd just done it properly to begin with.
- Glen GSR III
- guess its me thats broke
- Posts: 581
- Joined: Wed Jan 11, 2006 7:34 pm
- Location: Toowoomba, Queensland
Who is online
Users browsing this forum: No registered users and 18 guests