Kone or Pod filter on a stock Starion :)

Sigve_B · Post by **Sigve_B** » Sun Jun 10, 2007 11:37 am

Been searching around the forum gathering som info :) just noticed that some people say that u cant use a kone or pod filter on a stock starion. But i got a green filter on my JA and it works like a charm :D

chunkhead · Post by **chunkhead** » Sun Jun 10, 2007 11:52 am

You can use whatever you like...

As long as the AFM is still inside it! :D :D :D rofl

Sigve_B · Post by **Sigve_B** » Sun Jun 10, 2007 11:57 am

Yepp :) thats right just thougt i mention it :)

Starion_Turbo · Post by **Starion_Turbo** » Sun Jun 10, 2007 3:27 pm

theres a kit sometimes on ebay motors USA, but is designed for different afm I think. should be adaptable.

Chryzla · Post by **Chryzla** » Sun Jun 10, 2007 4:18 pm

where did you get that and how did you bolt it on? :o

Sigve_B · Post by **Sigve_B** » Sun Jun 10, 2007 4:24 pm

got it from a friend, its a regular green filter so should be easy to get. just cut the standard air box, and cut the filter to mach and used sikaflex and glued them together.. only problem will be to clean the filter :roll:

Chryzla · Post by **Chryzla** » Sun Jun 10, 2007 5:59 pm

cool.. i might go look for one and screw it on instead :)

chunkhead · Post by **chunkhead** » Mon Jun 11, 2007 7:46 pm

Will only make the car perform worse though. All the air that it will get will be engine heat!

I'm currently sourcing an intact airbox for mine as the previous idiot owner thought it would be clever to cut loads of holes in mine! :x

Sigve_B · Post by **Sigve_B** » Mon Jun 11, 2007 8:17 pm

chunkhead wrote:Will only make the car perform worse though. All the air that it will get will be engine heat!

I'm currently sourcing an intact airbox for mine as the previous idiot owner thought it would be clever to cut loads of holes in mine! :x

Don`t think so...
U cant se it on the pic, but there are a fat air pipe from the bumper delivering fresh air straight on the filter. So the filter air is cold:) And for track use the headlamp is removed and a 5" pipe is ducted from the lamp and to the filter :)

Chryzla · Post by **Chryzla** » Tue Jun 12, 2007 3:17 pm

lol chunkhead. everyone cuts holes in them.. asif you want a hugely restricted intake box like is standard. its rediculous.

and it will only get heatsoak when sitting still, i.e traffic lights... my staz in summer goes up to almost top of gauge in summer anyway.

Post by **Alspos** » Tue Jun 12, 2007 4:41 pm

It's not as restricted as you might think for stock applications. Plus it has a nice cold air feed from under the guard. You can open up parts of the stock setup if you believe theres a restriction.

Starion_Turbo · Post by **Starion_Turbo** » Tue Jun 12, 2007 5:31 pm

you can rotate the air scoop behind the guard to face foward and re-drill the holes in the scoop to mount it.

chunkhead · Post by **chunkhead** » Tue Jun 12, 2007 10:09 pm

Mitsubishi might be assholes when it came to giving the Starion MPI, but they are not idiots. I assure you, as Al said, the Stock box will produce better air then that coming from the engine bay!

I've been told by the man that knows and I don't argue!!! :D

Chryzla · Post by **Chryzla** » Wed Jun 13, 2007 11:51 am

alright, ill let you believe it. fact is the standard intake hole is tiny. throttle will feel more restricted once you replace it :)

nzgsr · Post by **nzgsr** » Wed Jun 13, 2007 6:10 pm

there is always the point that the pipe from air box to turbo can collapse in itself under load because of the restriction a cold air feed from out of the engine bay would be much better than a cut air box
the hole in the inner gaurd is pretty big if you pull the stupid plastic duct out of it

Austarion

Kone or Pod filter on a stock Starion :)

Kone or Pod filter on a stock Starion :)

Who is online