Daves Starion

Display your ride and post power figures, dyno runs, drag and circuit times.
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

Is it still a 2L? Well done, Dave and also to the engine builder, Chris. :beer
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

Still a 2L, Still SOHC. This car is so fun to drive
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
User avatar
davidbek95
I've been here before
Posts: 249
Joined: Thu Jan 08, 2004 7:59 pm
Location: beautiful QLD (mackay)

Post by davidbek95 »

it has a jb diff i got from townsville,
quest
I love starions
Posts: 411
Joined: Fri Jan 09, 2004 7:42 pm

Post by quest »

dynojets torque vs rpm printout communicates so much easier what a motor is doing thru the whole rev band :)
hp & ft-lbs tq can indicate a motors grunt to an observer in an instant - easier to track changes & register tradeoffs too.

I'm wondering how much ft-lbs tq "1850 lbs" equates to.
Most of the serious 2.6s, the hp normally matches the tq value, ie. say 350hp/350tq, 400/420, 500/510, and so on.

I don't really see why the skepticism or secrecy. Throw the 'same mods' at the 2L as we 'wreckless' yanks do to our 2.6, the outcome "should" be proportional (based on displacement).

Very nice
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Re: there you go

Post by OLD FART »

davidbek95 wrote:Show Image: Image

Show Link : http://www.fr33z3.net/starions/Apr06/30 ... _copy2.jpg
Great result Dave .Hope to give it a nudge when my jb gets eagles & wisecos & can be retuned without having to worry about the factory pistons
Was that on 98 octane or c16 ?
Regards
Rad
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

98 octane from the pump....
I dont think dave has a race fuel tune with his current setup
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

What gear was it dyno'd in?
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

NXTIME wrote:What gear was it dyno'd in?
Looks like 3rd
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

maybe 2nd gear, with a 3.55 stock diff ratio? different gear ratio's alter torque readings on dyno's.


nice result, will be interesting to see what she pulls at the drags :) i always thought my 13.06 was too slow to be considered fastest sohc in oz.. bring on the 12's!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

Should be interesting to see at the drags. First time the car will be on the strip though so may not run at its best this meet. Can see it lacking traction though as car will probably only run on 215 street tyres. MPH will tell the cars potential though.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
TOMSUN
Group buy King
Posts: 2391
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

I can't wait to see this thing at the drags....
We all want to see the time slips :D

Should be able to knock Redzones orange JA out of the "Quickest SOHC" position... :D
1985 JB Starion #157
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

What MPH was the best you got out of your orange JA redzone, So i can compare it to Daves.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
User avatar
chunkhead
Mmmmm, I love rice
Posts: 1198
Joined: Thu Sep 30, 2004 2:57 pm
Location: Melbourne

Post by chunkhead »

Should be able to knock Redzones orange JA out of the "Quickest SOHC" position...
Well if Bodeo ever stops tinkering with his... :x :twisted: :twisted:
Gone V8 Hunting: Be Back In Seconds!

For Sale:
Xbox/360/Wii Mods Now Available
User avatar
davidbek95
I've been here before
Posts: 249
Joined: Thu Jan 08, 2004 7:59 pm
Location: beautiful QLD (mackay)

Post by davidbek95 »

well,tell you know it was not second gear,it was 3rd gear(ring the tuner),brendan were did u the get idea i am using 215's iam using your 245x18 i can spin them in third gear by hitting the throttle,nothing will be said about the engine combination.i can explain why.
regards david
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

JD_Stazza_Brendan wrote:What MPH was the best you got out of your orange JA redzone, So i can compare it to Daves.
my best MPH was 106.4, with a little wheelspin. that was running 18psi at the drags that day too, not the 20 it was dynoed with. should give u an idea though!

and yes looks like the SOHC rivalry is heating up, yep u guys gotta get on the strip and knock me off the perch, as the orange mobile is getting some badly needed upgrades (cam and ECU) when timmy gets back from the USA :pimp so she'll be heading back to the strip to pull some 12's :D
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests