cant spin the wheels?
-
- [P] Plates
- Posts: 39
- Joined: Fri Mar 30, 2007 6:34 pm
- Location: Yorkshire, England
cant spin the wheels?
hi guys, quick one for ya. sounds like a stupid question but thought i'd check.
not that i normally do this, or drive like a tugger,
but i just cant spin the wheels, ie burnout.
if i pile on the revs and dump the clutch the car just sits there revving and not moving, then moves off slowly.
however, the clutch never slips when driving, its totally fine.
time to start saving for a new one?
not that i normally do this, or drive like a tugger,
but i just cant spin the wheels, ie burnout.
if i pile on the revs and dump the clutch the car just sits there revving and not moving, then moves off slowly.
however, the clutch never slips when driving, its totally fine.
time to start saving for a new one?
Re: cant spin the wheels?
Yep, sounds like pressure plate to me.chiefbrody wrote: time to start saving for a new one?
-
- [P] Plates
- Posts: 39
- Joined: Fri Mar 30, 2007 6:34 pm
- Location: Yorkshire, England
LOL
Cheers guys
Not too interested in doing burnouts, I only just bought it a couple of weeks ago and I have some other problems too with sky high oil pressure and poor running, so I've been driving it ultra conservatively :D
And it does work fine when driving 'normally' hence why it took me a while to realise I couldnt smoke the tyres :D
- though the clutch does suddenly bite hard and left me kangaroo hopping down the motorway in slow traffic after I picked it up - never driven one before so thought it just took a while to master the clutch
Cheers, looking for parts now so will get it done
Cheers guys
Not too interested in doing burnouts, I only just bought it a couple of weeks ago and I have some other problems too with sky high oil pressure and poor running, so I've been driving it ultra conservatively :D
And it does work fine when driving 'normally' hence why it took me a while to realise I couldnt smoke the tyres :D
- though the clutch does suddenly bite hard and left me kangaroo hopping down the motorway in slow traffic after I picked it up - never driven one before so thought it just took a while to master the clutch
![Embarassed :oops:](./images/smilies/icon_redface.gif)
Cheers, looking for parts now so will get it done
if the motor isn't healthy or there are other problems to get the power to do a burn out ( depending on the health of the clutch ) you may have to heal/toe so the revs don't drop too much and the brake stops the car from moving and ease the clutch with a final pop at the end...... you motor might not have the ability anymore to make low down torque to keep the revs up even when dropping it from 5kchiefbrody wrote:LOL
Not too interested in doing burnouts, I only just bought it a couple of weeks ago and I have some other problems too with sky high oil pressure and poor running, so I've been driving it ultra conservatively :D
![Image](http://i78.photobucket.com/albums/j120/abcnoll/youlike.jpg)
-
- [P] Plates
- Posts: 39
- Joined: Fri Mar 30, 2007 6:34 pm
- Location: Yorkshire, England
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
-
- Big Dorifto
- Posts: 88
- Joined: Wed Oct 13, 2004 3:46 pm
- Location: Central AK - N.Z
Haha at the risk of getting flammed here...
Sender unit has no idea of oil temp. Works purely
on pressure. There is more oil pressure when cold as
the oil is thicker.
You could try another pressure sender / cluster.
Also probably not a bad idea to do a oil change
and put some good oil in it. I know that Smoke Stop
Treatment sends oil pressure sky high.. personal experience.
Sender unit has no idea of oil temp. Works purely
on pressure. There is more oil pressure when cold as
the oil is thicker.
You could try another pressure sender / cluster.
Also probably not a bad idea to do a oil change
and put some good oil in it. I know that Smoke Stop
Treatment sends oil pressure sky high.. personal experience.
96 R33 GTS25t - 4 Sale
02 Impreza
02 Impreza
-
- [P] Plates
- Posts: 39
- Joined: Fri Mar 30, 2007 6:34 pm
- Location: Yorkshire, England
I didnt think the oil pressure sender would know what temp it was, I just didnt know how it would seem to work when warm but not when cold. I didnt think cold oil would make that much of a difference but concluded that seen as it worked when warm then it must be working, unless something else strange was hapepning :?
Although when cold, and oil pressure is registering top of the guage, I would have thought it would pop th edipstick out or something. I remove the dipstick and give it a rev and no difference to oil pressure, so it cant be that high surely? :?
I was thinking maybe a small blockage somewhere that is causing higher pressure when cold, then going away as everything warms up and gets all flexible like :P
Although when cold, and oil pressure is registering top of the guage, I would have thought it would pop th edipstick out or something. I remove the dipstick and give it a rev and no difference to oil pressure, so it cant be that high surely? :?
I was thinking maybe a small blockage somewhere that is causing higher pressure when cold, then going away as everything warms up and gets all flexible like :P
Electric oil presure senders can become erratic with age (like me :( ) so you have 2 options get new sender or as i did install a new mecanical gauge that will tell u once & 4 all if u have other issues 2 fix
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
Who is online
Users browsing this forum: No registered users and 6 guests