Intercooler install

Tezstaz · Post by **Tezstaz** » Thu Mar 29, 2007 10:28 am

is it fairly easy to mount a 450x300x76 intercooler in a JA?could anyone let me know of any pitfalls or any good tips for installation cheers Tez :roll:

Starion_Turbo · Post by **Starion_Turbo** » Thu Mar 29, 2007 1:42 pm

relativley easy, move your oil cooler back closer to the air con cooler and mount under the bonnet latch, just needs the lines bent and a couple new bolts.

It can be installed without loss of any washer bottles and overflows if done right with enlarged stock holes and slim fans.
any questions just ask
heres my setup:
http://forums.austarion.com/viewtopic.php?t=8072

starion4me · Post by **starion4me** » Thu Mar 29, 2007 7:24 pm

mate you can install a 600x300 easily and it is completely in the air flow

groupAralliart · Post by **groupAralliart** » Thu Mar 29, 2007 8:01 pm

Would you recommend the 600 x300x? for a twin cam mpi turbo upgrade or a larger unit? I don't want to increase lag. What core thickness is yours and what price should I expect to pay? Cheers Steve

OLD FART · Post by **OLD FART** » Fri Mar 30, 2007 5:32 am

I have a 600 x300 x75 custom PWR i/c & dont have n e lag once it is in the cam powerband & in the right gear
But i must point out that mine is mounted in the aircon position 2 get the shortest possible pipework in order2 minimise lag

RiceThief · Post by **RiceThief** » Fri Mar 30, 2007 3:37 pm

I think a 600x300 is an ideal size for a starion as it fit between the chasis rail depending on how low you mount it and the design of the intercooler cores. As for lag, i doubt there would be much difference between say a 450 wide core vs a 6oo wide core. As for price you can but one as cheap as $175 for a 600 x 300 x 75 from just jap which is a copy of the hybrid core or something more expensive like from pwr.

silo · Post by **silo** » Fri Mar 30, 2007 4:03 pm

Mines a 450x300 Hybrid! Fits nice between the rails, but as far as lag.....
Ill let ya know in a year when im done :x

groupAralliart · Post by **groupAralliart** » Sun Jul 22, 2007 8:05 pm

starion4me wrote:mate you can install a 600x300 easily and it is completely in the air flow

Has your opinion on your intercooler changed at all? Would you install it as you have pictured above? I would be interested to see any pics of your pipe work as I am considering core size and positioning of the cooler. I also have a widebody and your spoiler/cooler looks almost factory from the front. I don't want it to be noticeable from the front like some that hang down and have pipework exposed. Also what size pipe work out of the cooler, I was thinking 2 1/2", would 3" from the cooler into 2 1/2" pipework be a better option or advantage?

starion4me · Post by **starion4me** » Mon Jul 23, 2007 2:55 pm

i have a nissan motor in mine so the pipe work would be quite different mate. theres a few pics on my website on the car page

thanks

Austarion

Intercooler install

Intercooler install

Who is online