Anyone ever lost their nuts....

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Anyone ever lost their nuts....

Post by JDSTAZ45 »

I started to get a suspension noise from the front of my car after spending some time on the freeway...

A few months ago, I had a tie rod replaced and wheel alignment done and the suspension fully looked over. Everything sweet!

After coming across this new noise I thought now what?? I spent an hour under the car checking and rotating the wheels etc...
I couldn't pick it... tyre condition, dodgey caliper, warped disc, steering ???

I drove it to the local mechanic and the car was put on the hoist. After a look at the above possibilities,
the wheel was next to be taken off...
4 out of the 5 nuts were loose. Real loose! The 5th nut was the lock nut.
As my rim is black along with the locknuts it was hard to notice...

Saved by the Lock nut!! I wonder was it an attempted theft, on road vibrations or workshop???
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

I bet it was a prank but so fuckhead loser, hence why your lock nuts were the only one on tight, use to happen alot near the tafe i use to live close by.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
User avatar
Chryzla
Princess
Posts: 1320
Joined: Wed May 19, 2004 6:26 pm
Location: Adelaide, SA
Contact:

Post by Chryzla »

had it happen to me without locknuts
got out and wobbled the tyres.. heard the clunking when i did that so went round the car and did them up


some people are wankers!!
1983 JA Staz
User avatar
rallidave
Enthusiast king
Posts: 889
Joined: Mon Feb 27, 2006 11:14 pm
Location: cairns

Post by rallidave »

check your wheel bearings too, worn bearing can work nuts loose
but ive never heard of them coming right off! :shock:
85 JB 4g63 SOHC
94 EVO2 4g63 DOHC
i wanna go fast
ROCKETMAN
Big Dorifto
Posts: 96
Joined: Wed Jan 18, 2006 3:40 pm
Location: Liverpool NSW

Post by ROCKETMAN »

I had this problem with the old rolla, check your bearings.
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests