Display your ride and post power figures, dyno runs, drag and circuit times.
Bitza
I've been here before
Posts: 244 Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA
Post
by Bitza » Tue Feb 27, 2007 10:47 am
The car is still in primer, I'm fixing the little things like the tail lights and repainting mouldings, bumpers and repairing the inside trim.
Being over 20 years old everything I remove breaks and it pisses me off.
decoy
Let Me Out!
Posts: 4424 Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:
Post
by decoy » Tue Feb 27, 2007 11:42 am
yeh those little clips in the doors are really bad. i've replaced the clips in the boot trim with new generic ones, works a treat.
Bitza
I've been here before
Posts: 244 Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA
Post
by Bitza » Thu Mar 01, 2007 9:09 pm
The car is coming along a treat!
Just one question though,
my trim is badly faded and I have spent a few dollars trying to get the right vinyl paint for the interior to touch it up, doe's anybody know the colour?
It's the grey or bone.
JPC
almost postwhore
Posts: 1016 Joined: Fri Feb 13, 2004 9:25 pm
Location: Perth, WA
Post
by JPC » Fri Mar 02, 2007 1:13 am
Don't bother trying to get a matching colour for a touch up, unless you want to spend a fortune in time and money on trial & error - far better to do entire sections. Which bits need touching up?
Starion nutter since 1988...
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
Bitza
I've been here before
Posts: 244 Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA
Post
by Bitza » Fri Mar 02, 2007 10:15 am
Mainly the door trims and the head lining.
Alspos
Flucking kwankers
Posts: 4107 Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:
Post
by Alspos » Fri Mar 02, 2007 11:30 am
Try a contrasting clour. No need to match.
Bitza
I've been here before
Posts: 244 Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA
Post
by Bitza » Fri Mar 02, 2007 12:23 pm
I have already bought 6 cans of vinyl paint. The cap colours look correct but when ya spray either one of them, it's either to light or too dark.
Won't look nice in the car, especially different colours.
Trying to keep the stazz original.
Just pisses me off.
JPC
almost postwhore
Posts: 1016 Joined: Fri Feb 13, 2004 9:25 pm
Location: Perth, WA
Post
by JPC » Sat Mar 03, 2007 3:45 am
Have a squiz at:
http://forums.austarion.com/viewtopic.p ... highlight=
Re-doing whole sections (ather than touching up) is worth it.
Starion nutter since 1988...
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
Bitza
I've been here before
Posts: 244 Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA
Post
by Bitza » Sat Mar 03, 2007 12:09 pm
That informationwas very useful, maybe it should have been moved to the technical section.
decoy
Let Me Out!
Posts: 4424 Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:
Post
by decoy » Sun Mar 04, 2007 12:27 pm
You'll notice that the tech sections is more mechanically orientated while body and interior section is more about visual (in most cases, non performance mods).
Bitza
I've been here before
Posts: 244 Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA
Post
by Bitza » Sun Mar 04, 2007 12:45 pm
Then maybe the site could have a body and interior section?
Bitza
I've been here before
Posts: 244 Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA
Post
by Bitza » Mon Mar 05, 2007 6:27 pm
Here's an update on how the Starion is progressing:
Tail lights removed and garnish repainted along with rust removal:
Drivers door and quarter panel straightened:
Doors trims recoloured (Thanks to you guys)
Bitza
I've been here before
Posts: 244 Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA
Post
by Bitza » Tue Jun 19, 2007 7:54 pm
Ok, the windscreen has been repaired.
Gone from this:
To this:
Losts of welding with a little bog to cover the grind marks.
DanVR4
Dorifto!
Posts: 58 Joined: Wed Oct 04, 2006 3:04 pm
Location: Adelaide
Post
by DanVR4 » Wed Jun 20, 2007 11:22 am
Great work for a home job! It's going to be a nice ride when it's done
2.3L VR4 - 300awhp
Alspos
Flucking kwankers
Posts: 4107 Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:
Post
by Alspos » Wed Jun 20, 2007 12:12 pm
Trims look excellent.
Users browsing this forum: No registered users and 10 guests