I got a qoute from pedders to do my stuff... was going to cost a bit over 2k for everything. bushes, joints etcStarion_Turbo wrote:pedders dont have anything in stock for starions, or so thay said.
shocks
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
i actually meant they dont stock shocks, they suid in an e-mail that they could find something that would fit but nothing specifically for starion.
Also they apparently dont have springs for them.
Also they apparently dont have springs for them.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
shocks
there r currently some kyb shocks on ebay says they r 4 86 on though so dnt knw if they will fit
http://cgi.ebay.com/ebaymotors/KYB-GR-2 ... dZViewItem
http://cgi.ebay.com/ebaymotors/KYB-GR-2 ... dZViewItem
- Glen GSR III
- guess its me thats broke
- Posts: 581
- Joined: Wed Jan 11, 2006 7:34 pm
- Location: Toowoomba, Queensland
the narrow and the wideys had different model numbers for the tokicos so don't beleive the KYBs will match either.
by pedders i meant a cut and shut mod type shock
by pedders i meant a cut and shut mod type shock
_
_________________
_________________
POOP!
may as well go custom then?
my local did have a few combinations.
custom koni adjs around 570 pr.
sound ok?
may as well go custom then?
my local did have a few combinations.
custom koni adjs around 570 pr.
sound ok?
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
Re: shocks
This were mine will be coming from, having huge communications delays, add $20 for a custom order and they will switch the 365060 parts for 365029 parts to suit the more common 83 model.nzgsr wrote:there r currently some kyb shocks on ebay says they r 4 86 on though so dnt knw if they will fit
http://cgi.ebay.com/ebaymotors/KYB-GR-2 ... dZViewItem
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
-
- Big Dorifto
- Posts: 88
- Joined: Wed Oct 13, 2004 3:46 pm
- Location: Central AK - N.Z
Are all starion shocks the same? I have a 87 5 Stud model with leaking rear shocks and was about to ask you guys about what to get as nowhere in NZ has listing for them. Will these rear insert numbers work??Starion_Turbo wrote: Front: 365029
Rear Left: 235004
rear Right: 235003
Thanks heaps :D
Cheers
96 R33 GTS25t - 4 Sale
02 Impreza
02 Impreza
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
rear shocks are the same yes. i put those part numbers in a JA last year..
widebody and narrowbody have different length frt struts so use different shock inserts..
widebody and narrowbody have different length frt struts so use different shock inserts..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- Enthusiast
- Posts: 605
- Joined: Thu Apr 06, 2006 2:21 pm
- Location: Christchurch,New Zealand
They have bilstein type oil filled shocks. Autoline in Auckland rebuild them. I'm still meaning to get around to this ( 5 years later)87_starion wrote:
Are all starion shocks the same? I have a 87 5 Stud model with leaking rear shocks and was about to ask you guys about what to get as nowhere in NZ has listing for them. Will these rear insert numbers work??
Thanks heaps :D
Cheers
The fronts I did a converson to monroe inserts.
1985 Widebody Factory Four Wheel Steering
1986 Euro Spec-ABS,LSD etc
1986 Euro Spec-ABS,LSD etc
-
- Big Dorifto
- Posts: 88
- Joined: Wed Oct 13, 2004 3:46 pm
- Location: Central AK - N.Z
Any idea on what they charge to do this? I have found a set of KYB (big fan of KYB Shocks) on EBAY using the part numbers the aussie dudes listed (cheers guys). Im working out total cost incl shipping to NZ at the moment. I rang Stocks with the part number and they were about as useful as a bull with tits... they have no idea
96 R33 GTS25t - 4 Sale
02 Impreza
02 Impreza
-
- Enthusiast
- Posts: 605
- Joined: Thu Apr 06, 2006 2:21 pm
- Location: Christchurch,New Zealand
It was about $500 including shipping to and from Auckland.
I removed the shocks and tried to find any replacement possible but came up with zero. I like KYB but will be rebuilding mine and only when I have to will I modifly them to suit.
No brake or suspension parts off earlier Starions will fit only body stuff will
I removed the shocks and tried to find any replacement possible but came up with zero. I like KYB but will be rebuilding mine and only when I have to will I modifly them to suit.
No brake or suspension parts off earlier Starions will fit only body stuff will
1985 Widebody Factory Four Wheel Steering
1986 Euro Spec-ABS,LSD etc
1986 Euro Spec-ABS,LSD etc
-
- Big Dorifto
- Posts: 88
- Joined: Wed Oct 13, 2004 3:46 pm
- Location: Central AK - N.Z
Yeah I had heard that my starion has bigger brakes than the earlier ones, didnt realise it was true. You know how it is when people tell you stuff sometimes. So if its 5 stud that means it has different shocks as well and that the part numbers listed for 4 stud models wont fit mine?????
96 R33 GTS25t - 4 Sale
02 Impreza
02 Impreza
Who is online
Users browsing this forum: No registered users and 4 guests