In the process of installing the KYB GR2 front insert from Oscar in the States but the fron insert is too long.
I have draine the fluid out of the strut housing and have inserted the kyb gr2 inserts but it sticks out too far. At the bottom of the strut housing is a mound that causes the kyb inserts to stick out too far.
Anyone come across this before and what did you do to get around it? :beer
Front strut insert replacement
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
I have installed 2 complete sets of kyb GR2 shock on starions and they have gone perfect both times.
Check that part numbers are 365029 for fronts.
Check that part numbers are 365029 for fronts.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
I'm happy to be proved wrong, but I think WB struts are longer than NB's.
If you have inserts from Oscar, they will be WB. What's your car? NB?
If you have inserts from Oscar, they will be WB. What's your car? NB?
Classic Touring Car racer
#20 Pre 93 touring cars
www.classictouringcars.com
RWD is for Heros, 4WD is for Zeros!
#20 Pre 93 touring cars
www.classictouringcars.com
RWD is for Heros, 4WD is for Zeros!
Who is online
Users browsing this forum: No registered users and 33 guests