alternative parts list

benny · Post by **benny** » Thu Dec 07, 2006 10:27 am

i have only just got my 2nd starion ( after blowing the first and waiting 6 yrs til another popped up when i had the money :) )

and as most of you know some parts are interchangable with newer models so how about we put our heads together and put a list of those parts on here?

triton steering wheel boss kit is identical
triton headlights might go but i'll have to confirm
Lower control arm ball joints same as 1980-87 scorpion & sigma
nolothane lower front arm bushes, listed for an LC lancer, and an 80's RWD sigma/scorpion.
Optical Dizzy from an L300 is usable on the staz
sonata dizzy
water pump from a galant 86 fits
Cylinder head out of a 2.0 N/A spacewagon
altenator from a ´95 Galant that required liltle modifacations
aerial in the pillar is replaceable with a magna one

eci o-rings got these from cbd bearings in caboolture QLD

BS016 x 2
BS010 x 2
BS011 x 2
BS137 x 1
BS043 x 1

the 4 form-fit ones on the injectors i haven't found replacements for just hope yours can be reused ( also i didn't take the fuel return apart 3 more o-rings live in there ) and i doubled up on the fuel in pipe.

what have you found will fit as a replacement for the starion item??

SIR GSR · Post by **SIR GSR** » Thu Dec 07, 2006 10:53 am

That's a damn good idea Benny.....

Considering many of us are 'frankensteining' our cars to keep them alive...

silo · Post by **silo** » Thu Dec 07, 2006 11:43 am

Lower control arm ball joints same as 1980-87 scorpion & sigma

scum · Post by **scum** » Fri Dec 08, 2006 4:47 pm

silo wrote:Lower control arm ball joints same as 1980-87 scorpion & sigma

your a champ :roll:

entire steering setup same as 1980-87 scorpion & sigma???? (no pwr rubbish)

tri26t · Post by **tri26t** » Fri Dec 08, 2006 5:48 pm

Im thinking there must be heaps of front end parts the same
as I have a Starion with GK sigma cross member and
struts, I reckon thats because the last owner put a
2.6l 4g54 N/A motor in her (FARKS ME why), OK he couldnt
aford to have it off the road at the time.

Cheers:Phil.

JPC · Post by **JPC** » Sat Dec 09, 2006 1:32 am

Looks like we should resurrect this thread, already covering the same topic:

http://forums.austarion.com/viewtopic.p ... highlight=

benny · Post by **benny** » Sat Dec 09, 2006 9:36 am

just read it and damn... not much will chop and change

thats soo not cool

ProZac · Post by **ProZac** » Sat Dec 09, 2006 1:16 pm

I bought some new nolothane lower front arm bushes, they were also listed for an LC lancer, and an 80's RWD sigma/scorpion.

benny · Post by **benny** » Wed Dec 20, 2006 1:59 pm

added eci o-ring list ( thanks to redzone for the heads up :) )

decoy · Post by **decoy** » Wed Dec 20, 2006 3:34 pm

Front springs are same as sigma springs i think... Can you confirm Dallas?

RiceThief · Post by **RiceThief** » Wed Dec 20, 2006 3:51 pm

Hey benny did you go to cbd bearings on aerodrome road, my starion is just around the corner from there.

Edit <----- 666 post, yeah

Website · Post by **WidebodyWoody** » Wed Dec 20, 2006 6:54 pm

I dont' suppose there is any replacement for the drag link

JPC · Post by **JPC** » Thu Dec 21, 2006 12:54 am

WidebodyWoody wrote:I dont' suppose there is any replacement for the drag link

Yes, but only with one from another Starion

Website · Post by **WidebodyWoody** » Thu Dec 21, 2006 10:13 am

well la de da. LOL Yeah I knew that. It would be cool if a different steering system could be bolted on instead of the dam steering box and drag link

redzone · Post by **redzone** » Thu Dec 21, 2006 6:35 pm

bolted on rofl sorry woody i had 2...

if u want a recoed drag link i can get em done for $165 (both ends done)

Austarion

alternative parts list

alternative parts list

hhmmm

Who is online