Starion Fuel Chips 98RON

87_starion · Post by **87_starion** » Mon Jul 03, 2006 5:21 pm

Is this for 8valve motors only or DASH aswell?

Starion_Turbo · Post by **Starion_Turbo** » Tue Jul 04, 2006 8:46 pm

For 8 Valve engine

Starion_Turbo · Post by **Starion_Turbo** » Sun Oct 15, 2006 11:09 am

bump, saw them sitting on the shelf the other day thought it was about time to move this post back up the list :D

bigd · Post by **bigd** » Tue Oct 17, 2006 10:47 pm

What's involved in the soldering and how easy is it to feck it up?

flav · Post by **flav** » Tue Oct 17, 2006 10:50 pm

if yr pretty good at soldering u can do it, but it takes time. Otherwise i will be selling off complete change over units shortly.

bigd · Post by **bigd** » Tue Oct 17, 2006 10:53 pm

What sort of coin would a change over unit be? To be honest my soldering skills were good when i was 10. thats a long time ago. I'm in Ireland at the mo - we have 98 octane at the pump but i don't know if it is leaded. would that matter?

flav · Post by **flav** » Tue Oct 17, 2006 11:23 pm

We will have a price on this by the weekend and units possibly end of next week.

Starion_Turbo · Post by **Starion_Turbo** » Wed Oct 18, 2006 2:23 pm

hi

as far as soldering goes, you need to remove a 40 pin microcontroller intact from a dual layer circuit board (soldered both sides) then install a 40 pin socket in its place, the cip then pushes into this.

The biggest issues are that the chip is somewat glued down, the boards are 25 years old and the tracks have a tendency to lift off the board.

all fuels now produced are unleaded, (save for avgas) this isnt a problem as the starion heads (being alloy) have hardened valveseats.

bigd · Post by **bigd** » Wed Oct 18, 2006 4:37 pm

Thanks for that. If ya get a price on the replacement unit with chip in it i think that'd be safer. let me know.

Austarion

Starion Fuel Chips 98RON

Who is online