Black Bonnet

RiceThief · Post by **RiceThief** » Thu Oct 12, 2006 8:38 pm

I just painted my bonnet with that brightside stuff, the results are not too bad considering it comes off a roller with almost no prep. Tell me what you think.

SIR GSR · Post by **SIR GSR** » Thu Oct 12, 2006 9:31 pm

That looks pretty damn good....Nice work.

Could almost have people thinking it was CF :D

Post by **Alspos** » Fri Oct 13, 2006 8:46 am

Looks good from a distance, what's it like up closer? Much peel?

RiceThief · Post by **RiceThief** » Fri Oct 13, 2006 3:30 pm

Hey Al,

for a close up shot refer to this post http://forums.austarion.com/viewtopic.p ... 5&start=30 the results are not too bad, the results would have been better if I did better prep.

chunkhead · Post by **chunkhead** » Fri Oct 13, 2006 5:56 pm

Did you just 3 coat it or did you wetsand in between coats?

grothie1978 · Post by **grothie1978** » Mon Oct 16, 2006 6:51 am

thats looks awesome
so how would u go about doing little parts of panels and corners?
very interested, might do it on my mates shite box :beer

RiceThief · Post by **RiceThief** » Mon Oct 16, 2006 4:03 pm

I did 2 coats then sanded before the 3rd coat.

I used a 100mm roller that was good enough for most small areas

DKshauno · Post by **DKshauno** » Mon Oct 16, 2006 7:21 pm

hi i'm shaun from townsville , Here's a pics of my bonnet

chunkhead · Post by **chunkhead** » Mon Oct 16, 2006 10:59 pm

I think RiceTheif was referring to the "Paint" rather then the fact that his bonnet was black...

DKshauno · Post by **DKshauno** » Mon Oct 16, 2006 11:53 pm

it was on the subject of a black bonnet i was just showing mine off

Austarion

Black Bonnet

Black Bonnet

Who is online