Steering

CaptainShiner · Post by **CaptainShiner** » Sat Mar 27, 2004 1:08 pm

Has anyone here converted their steering to non-power assist, how difficutly was it and what did you have to do?

Cookiemonster · Post by **Cookiemonster** » Sat Mar 27, 2004 1:09 pm

Step 1: remove power steering belt.

Finished.

hcca · Post by **hcca** » Sat Mar 27, 2004 1:11 pm

Won't it make the steering really heavy though?

Apparently you can stick a non-power steer Sigma box in though.. straight bolt up.

Glenjo · Post by **Glenjo** » Sat Mar 27, 2004 3:48 pm

I drove around in a JA for 5 months with no power steering.. its not really that bad. at first it feels a heavier (obviously), but if you shave your head you can pull off the vin deisel look when your biceps pump out to 3 times the size they should be

Post by **Alspos** » Mon Mar 29, 2004 1:37 pm

I've heard that a Sigma steering box will bolt in too. It's too bloody hard to steer without PS running on a staz. Swap the box and it would be a little heavier to turn but not much, it's not like there's a huge amount of weight to move around.

RallyStarion · Post by **RallyStarion** » Mon Mar 29, 2004 10:40 pm

The Sigma box should interchange but I think the ratio is different. You would have to change the Steering Arm too as it is shorter on the Sigma ( about 20mm I think ) but more importantly the Sigma Steering Arm has the tapered hole in it, the opposite to the Starion set-up. If you had a stuffed Starion Drag Link you could probably convert everthing across from the Sigma, idler arm inc. but your sterring would be slower. Also don't know what affect it could have on your bump steer geometry.

Brian.

Starion VR4 · Post by **Starion VR4** » Tue Mar 30, 2004 7:38 pm

Could you shead some light as to why you want to go to manual steer? The power steering uses about 2-3 Hp on static turn , when moving it takes about 0.5-1Hp depending on what speed your doing, surely you can't be chasing every little bit of power? :beer

toysrus · Post by **toysrus** » Tue Mar 30, 2004 7:43 pm

isn't steering more predictable without p/s ?

Starion VR4 · Post by **Starion VR4** » Tue Mar 30, 2004 8:07 pm

I don't think so, but ask an expert say, Holden Racing Team, Dick Johnson Racing, ETC.... :beer

toysrus · Post by **toysrus** » Tue Mar 30, 2004 9:16 pm

well......all I know is that with p/s torque steer is multiplied rofl

Paradoxx · Post by **Paradoxx** » Tue Mar 30, 2004 10:27 pm

The power assisted steering pretty much turns off after 80km/h so there shouldnt be a problem with predictability
I love the steering in my car, one of the best setups i have ever driven.

Steve

Austarion

Steering

Steering

Steering

power steering

steering

Who is online