how do i get my horn to work through a boss kit?
there is to plugs on back of horn button and a hole in the back of the boss kit, when a wire is put threw the hole on bss kit horn stays on.
how can i get the horn to just engage when the button is pressed?
any help would be great
Make sure the wire coming from the horn isn't earthing out on smething or touching something it isn't supposed to. Your wire coming from the horn may have damaged insulation and is shorting out when you pull it through the hole, use some insulation tape to cover it up if you find any damage along the wire.
looks connected correctly, one wire goes to earth other comes from horn, when the path to ground is compleated the horn works.
Use insulated plugs to connect it to horn button, this makes sure that they cant short. check that the horn wire isnt connecting to the boss kit in any other way or horn will turn on.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
test horn button for nrmal operation - open cicuit until depressed
3 Most Important Sayings of Motor Car Racing:
1)"To Finish First, First You Must Finish" - Jackie Stewart
2)"For Speed, Add Lightness" - Colin Chapman
3)"Hondas Are Gay" - Valentino Rossi
