Starion ride height, pictures wanted please.

Starion_Turbo · Post by **Starion_Turbo** » Wed Jun 28, 2006 12:40 am

Ok

I have coming a set of GR-2 Shocks from USA (currently somewere in Ascot Vale) and while im at it I want to do the springs starting with rear, I have already decided that I will lower the rear, however I like were the front is sitting already but am unsure as to weather the springs have sagged or if that is actually the stock height of the front.
Is it possible to combine lowered rears with standard height fronts?
How much lower are the king springs lowered (40mm?)

So does anyone have a side on picture of their car with lowered king springs all round and still have factory 14 inch rims with standard diameter tyres?? Or have standard height springs and factory wheels and a pic??

Mine is shown below:

Thanks
Dallas

OLD FART · Post by **OLD FART** » Wed Jun 28, 2006 7:33 am

Dallas check out the QLD Cruise pics .Ihave lowered King springs and 3" zorst and only have about 5 " clearence

WANTSOM · Post by **WANTSOM** » Wed Jun 28, 2006 12:38 pm

I think the King Springs are 30mm lower, then maybe settle to 40mm after some driving.

If you decide to go with the lowered rear King Springs I have a set for sale and mates rates. They are basically brand new and in the box they came in.

Starion_Turbo · Post by **Starion_Turbo** » Wed Jun 28, 2006 1:09 pm

were can I find these pictures??

I suspect it would be cheaper to buy them here given delivery costs.

RiceThief · Post by **RiceThief** » Wed Jun 28, 2006 7:31 pm

This is the pic of my car with king springs

This is old farts car

Starion_Turbo · Post by **Starion_Turbo** » Thu Jun 29, 2006 12:24 am

that lowered ricethief?

NXTIME · Post by **NXTIME** » Thu Jun 29, 2006 4:49 pm

What size tyres are on your car there, Rice?

RiceThief · Post by **RiceThief** » Thu Jun 29, 2006 8:49 pm

Yeah it was taken shortly after it was lowered, im not 100% sure but i swear that the old sagging springs were lower.

Nxtime - there something like 215/60 i think, they're like buggy tyres hehe

Starion_Turbo · Post by **Starion_Turbo** » Thu Jun 29, 2006 9:46 pm

should have 215 / 65 on 14 or 225/ 60 on 14
for closest to stock size

kiwi_EX · Post by **kiwi_EX** » Fri Jun 30, 2006 8:01 am

I'm going through the same questions and trying to decide on standard or lowered King springs and because of sagging I have no idea how my current ride height compares.

Can anyone with either standard or lowered Kings advise the measurement from the centre of the wheel to the edge of the guard (both front and back)??

I'm sure this would help both Dallas and me. :D :D

thanks
marty

Starion_Turbo · Post by **Starion_Turbo** » Fri Jun 30, 2006 10:51 am

Yeah my front springs have sagged to a lowered state possibly lower then lowered.

Ur best bet for a standard height picture is if somone has new standard height shocks installed, I'm pretty sure Ill be going lowered on the front.

Dallas

NiuginiStaz · Post by **NiuginiStaz** » Sat Jul 01, 2006 12:44 pm

ALL,
sorry to bud in but.....so what tyre size is stock???...or is it 215/60/R15??

regards

sam

Starion_Turbo · Post by **Starion_Turbo** » Sat Jul 01, 2006 7:10 pm

stock is 195, 70, R14

replacments for standard rim are 215, 65 , R14 and
225, 60, R14 (bridgestone 340 Eager)

Austarion

Starion ride height, pictures wanted please.

Starion ride height, pictures wanted please.

Who is online