Motor Rebuild
Motor Rebuild
Can anyone advise where the best place in Adelaide to get a Starion motor rebuilt? It's blowing smoke at idle and has some piston slap (i beleive).
...
post ikt in the mail to flav:D
bigmoz :pimp
bigmoz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
Where did you 2 guys come from? What starions do you have? Unfortunately I can't recommend any places in Adel yet :(
_
_________________
_________________
I can't really recommend any places either which is why I'm doing most of it myself 
The only thing I'm having done by someone else, is the boring/honing and balancing. The Repco reconditioning centre are pretty good and priced, like $300 to hot tank the block, bore/hone cylinders and balance the rotating assembly :beer
Also depends if you just want a standard rebuild or if you want to use different pistons to run more boost safely ?
The only thing I'm having done by someone else, is the boring/honing and balancing. The Repco reconditioning centre are pretty good and priced, like $300 to hot tank the block, bore/hone cylinders and balance the rotating assembly :beer
Also depends if you just want a standard rebuild or if you want to use different pistons to run more boost safely ?
Computer games don't affect kids I mean if PacMan affected us as kids, we'd all be running around in darkened rooms, munching magic pills and listening to repetitive electronic music :D
sounds good starrzzy, what starion do you have? I don't think i've seen you around Adel before...
_
_________________
_________________
-
starrzzy
- Lil' Dorifto
- Posts: 41
- Joined: Thu May 18, 2006 11:54 pm
- Location: Adelaide. (Southern Area)
Ja Starion,
Flav just talked me thru doing the lower balance shaft ..
Pic under "new to the group".. will start putting it back together next weekend .. Have to get some parts ..ie gaskets, crank seal,belts. flush all oil out of cooler,filters,and brake fluid,...has been sitting in a shed for awhile ..
Flav just talked me thru doing the lower balance shaft ..
Pic under "new to the group".. will start putting it back together next weekend .. Have to get some parts ..ie gaskets, crank seal,belts. flush all oil out of cooler,filters,and brake fluid,...has been sitting in a shed for awhile ..
Who is online
Users browsing this forum: No registered users and 2 guests