Starion Fuel Chips 98RON
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
Starion Fuel Chips 98RON
Hi All
Up for sale I have Fuel chips - Designed to run 98 Octane Fuel.
Claimed 147KW @10PSI (Gain 22KW from stock without compromising your mixtures)
Price: $100 each (Posted)
You will get: A Chip, A socket and some instructions.
you will need soldering skills, tools (Soldering Iron, Solder, Cleaner, Solder sucker, Desoldering Braid and patience.
If you require installation it can be done for an additional $50 this includes postage back and I will require your ECU for installation and testing.
All chips have been tested @ 10psi and to 5000 - 5500RPM and provided smooth power up to this point and probably beyond.
First 8 in will get them, payment via bank depisit or money order, payment to be made within 5 days please, details will be given via PM or e-mail please specify.
Chips will be dispatched only after I have confirmed that payment has been recieved.
If you have any questions please ask and i'll do my best to answer them.
Chips Remaining: 6
Thanks
Dallas
Up for sale I have Fuel chips - Designed to run 98 Octane Fuel.
Claimed 147KW @10PSI (Gain 22KW from stock without compromising your mixtures)
Price: $100 each (Posted)
You will get: A Chip, A socket and some instructions.
you will need soldering skills, tools (Soldering Iron, Solder, Cleaner, Solder sucker, Desoldering Braid and patience.
If you require installation it can be done for an additional $50 this includes postage back and I will require your ECU for installation and testing.
All chips have been tested @ 10psi and to 5000 - 5500RPM and provided smooth power up to this point and probably beyond.
First 8 in will get them, payment via bank depisit or money order, payment to be made within 5 days please, details will be given via PM or e-mail please specify.
Chips will be dispatched only after I have confirmed that payment has been recieved.
If you have any questions please ask and i'll do my best to answer them.
Chips Remaining: 6
Thanks
Dallas
Last edited by Starion_Turbo on Mon Jun 05, 2006 10:47 pm, edited 6 times in total.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
Hi
I have only run up to 10 psi as I had Fuel cut at about 11 - 12 and no I/Cooler however I believe flav tested his chip on his worked starion but unsure at what psi, will post when I can get hold of him.
This chip has revised fuel mapping, by specifying that you will run 98 octane the fuel map has been optimised for that specific fuel to provide the best mapping the ecu can to gain the most from it. It also eliminates lean spots from extra boost and over richening.
heres a 12 page brochure from another manufacturer:
http://www.powerchipgroup.com/datasheets/1/Mit0032.pdf
I have only run up to 10 psi as I had Fuel cut at about 11 - 12 and no I/Cooler however I believe flav tested his chip on his worked starion but unsure at what psi, will post when I can get hold of him.
This chip has revised fuel mapping, by specifying that you will run 98 octane the fuel map has been optimised for that specific fuel to provide the best mapping the ecu can to gain the most from it. It also eliminates lean spots from extra boost and over richening.
heres a 12 page brochure from another manufacturer:
http://www.powerchipgroup.com/datasheets/1/Mit0032.pdf
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
that is a dead set bargain dudes.
god with all these prices i wish i had a single cam again!!!
could pick up an easy 20kw a week! :beer
god with all these prices i wish i had a single cam again!!!
could pick up an easy 20kw a week! :beer
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
ur other option to 98 fuel is to add 10% methanol to premium unleaded. Have been doing this sucessfully for about 3 months.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Who is online
Users browsing this forum: No registered users and 11 guests