power steering removal

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
User avatar
S73R
Big Dorifto
Posts: 72
Joined: Fri Dec 09, 2005 9:39 pm
Location: Loxton

power steering removal

Post by S73R »

hey does anyone know wat car i can replace my staz power stering with a non power stering box ....
i have a leeking power stering box and i find the pump is allways in the way of my mods, pump is still good though
will a sigma box drop in??? or a magna???
"Only one way to live, Full BOOOST!!!!!!!!"
User avatar
fr335tyl3r
I'm Sorta Reformed!
Posts: 2073
Joined: Tue Apr 13, 2004 3:07 am
Location: Baulkham Hills, NSW

Post by fr335tyl3r »

Be a real man! Just take off the lines and plug up the holes (ie, use the same box). Lol its a bitch to drive with but its easy.
Multipoint Conversion Underway
http://starions.fr33z3.net/mpi/
User avatar
S73R
Big Dorifto
Posts: 72
Joined: Fri Dec 09, 2005 9:39 pm
Location: Loxton

Post by S73R »

is there another way i bought a pump for $300 now the box
leeks reel bad i wanted a easy way out. i cant drift with if i just plug up the
holes (too hard too steer)
i been driving with it like that 4 too long
"Only one way to live, Full BOOOST!!!!!!!!"
User avatar
fr335tyl3r
I'm Sorta Reformed!
Posts: 2073
Joined: Tue Apr 13, 2004 3:07 am
Location: Baulkham Hills, NSW

Post by fr335tyl3r »

The only time it should feel hard to steer without the PS is when you are at low speed. Drifting through corners should be no problems with a bit of help from a skatey rear end (ie, power oversteer)
Multipoint Conversion Underway
http://starions.fr33z3.net/mpi/
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

You can swap the sigma (Aus Mitsi) manual steering box over as an altrenative to just unplugging the existing Starion one.

Not as heavy or direct though.
Never argue with an idiot, it brings you down to their level and they beat you with experience.
User avatar
fr335tyl3r
I'm Sorta Reformed!
Posts: 2073
Joined: Tue Apr 13, 2004 3:07 am
Location: Baulkham Hills, NSW

Post by fr335tyl3r »

So the sigma box is a straight drop in (Relatively) greg? What do you mean by the "heavy and direct" comments?
Multipoint Conversion Underway
http://starions.fr33z3.net/mpi/
User avatar
SIR GSR
Loose Cannon
Posts: 1359
Joined: Thu Oct 06, 2005 12:00 pm
Location: On boost in Cairns

Post by SIR GSR »

Rather than bothering to take out the whole power steering assembly, just take off the belt that runs it....That way, you can replace it with one when you find one later down the track
KBS Drift Team
0409 487 321
Image
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

Freestyler asked:
What do you mean by the "heavy and direct"
The Starion gearbox (I think) is higher geared so when you disconnect the power steering there is more effort needed to turn the wheel. The Sigma box is lower geared so it requires less effort to turn but requires more turns lock to lock on the wheel. If that makes sense.
Never argue with an idiot, it brings you down to their level and they beat you with experience.
User avatar
fr335tyl3r
I'm Sorta Reformed!
Posts: 2073
Joined: Tue Apr 13, 2004 3:07 am
Location: Baulkham Hills, NSW

Post by fr335tyl3r »

Anyone have the figures on the gearing of the boxes, and the lock to lock turns?

Also, how much of a direct swap is this? I have been running without PS for a while now and it does shit me in the car parks a little bit (not that I plan on driving it to car parks much anyway, its more of a twisty road car :P). Would be intrigued if its a direct swap as I could grab one and revamp the steering in the car cause despite my best efforts there is still play in the damn steering :P
Multipoint Conversion Underway
http://starions.fr33z3.net/mpi/
flav
Austarion Occupant
Posts: 3374
Joined: Thu Apr 15, 2004 9:57 pm
Location: Melbourne

Post by flav »

Just get a box...i have one, and move the reservoir to the inner guard.
User avatar
cheaterparts
I love starions
Posts: 351
Joined: Mon Sep 27, 2004 7:36 pm
Location: melbourne aust

Post by cheaterparts »

fr335tyl3r wrote:Anyone have the figures on the gearing of the boxes, and the lock to lock turns?

the gregorys sigma manual has the sigma steer box at

variable ratio
2 point support type 18.5 - 22.51:1
3 point support type 17.2 - 21.2:1

if this is any help
cheater
tri26t
I love starions
Posts: 484
Joined: Fri Nov 26, 2004 7:19 pm
Location: townsville

gkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgkgk

Post by tri26t »

Hey all, we have put a gk (analog "LOL") steering box
in a JA, the box is (of cause) shorter at the steering colum
so we used the gk colum as well

All went into the starion without any other changes
even the wiper switch has the same plug.


IT WORKS

Cheers:Phil.
TORQUES-CHEAP.
linx
Newcomer
Posts: 9
Joined: Sat May 13, 2006 5:38 pm
Location: Gold Coast

Post by linx »

Rofl... I did ask a similar question in my thread...

The sigma box is slow compared to the starions. And you will loose some turning circle.

I plan to just plug up the power steering hoses up untill I can make up a bracket to fix the 2.6 litre. If you are still having troubles, I will inform you how I went about changing my steering setup.
tri26t
I love starions
Posts: 484
Joined: Fri Nov 26, 2004 7:19 pm
Location: townsville

get some musciles

Post by tri26t »

GK sigma steering box in starion is ok
but you dont want to be parking all the time
its a tad heavy (a BIG tad) however it showed
2 deg neg caster and 1.5 camber with 1.5 toe in

kind of reminds me of my old Monaro days
HJ 4dr 350 M21 (rrrrr) no assist

YOU DONT NEED THE GYM to make big musciles
Cheers:Phil.
TORQUES-CHEAP.
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests