Im Nervous!
Im Nervous!
Finally turning the key (actualy flick a switch) on the racecar.
Maybe Monday or Tuesday once we finish wiring in the Wolf. I have already turned it over without the spark plugs in to get oil pressure and managed 35psi at cranking speed.
Its getting close to the first race on the 18th of June so i hope there is no problems.
I have had a lot of positive comments on the presentation from fellow racers saying that it should win best presented car :D
I will keep you all in the loop, if your interested.
Ash
Maybe Monday or Tuesday once we finish wiring in the Wolf. I have already turned it over without the spark plugs in to get oil pressure and managed 35psi at cranking speed.
Its getting close to the first race on the 18th of June so i hope there is no problems.
I have had a lot of positive comments on the presentation from fellow racers saying that it should win best presented car :D
I will keep you all in the loop, if your interested.
Ash
Get Stroked! 2.3ltr EVO engine
- Starion VR4
- almost postwhore
- Posts: 1293
- Joined: Fri Jan 09, 2004 5:08 pm
- Location: Brisbane
w
Thats GR8 2 hear ash! How about a video of the firing up? might give a few people an idea how easy a wolf is to get started, a few of yr finished engine bay wouldn't hurt either, to inspire other.
Good luck for the day, will be watching the progress.
:D :o :beer
Good luck for the day, will be watching the progress.
:D :o :beer
30PSI,2.4L! Wolf 3D Ver 4. VR4 Head.
well done mate all the best with it.
would love to see some pics too! :beer
would love to see some pics too! :beer
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
Not Yet!flav wrote:Did it fire up?
Almost finished still have to:
Find a good earth for 3 relays and wire up the TPS. Run silicon hose from the manifold to the Fuel presure reg, Wolf's built in MAP sensor, BOV and the external waste gate. Put fuel in it, fill up the coolant, double check the oil's.
The Start up map should be easy as i had the Wolf up-dated so it can run straight from the CAS. All we have to do is add a basic map from an EVO.
I will definatly post some pics for you all tomorrow night.
Thanks for the interest
Ash
Get Stroked! 2.3ltr EVO engine
- Starion VR4
- almost postwhore
- Posts: 1293
- Joined: Fri Jan 09, 2004 5:08 pm
- Location: Brisbane
r
Hey ash, what injecters U running again? If U need U can use my old map that had 450CC running 12PSI, or more correctly my sons fuel map, just to get it started,
:beer
:beer
30PSI,2.4L! Wolf 3D Ver 4. VR4 Head.
Re: r
450cc blue top injector. Thanks for the offer but I should be OK as i Work for Top Racing now and have plenty of maps. Our tuner Steve Thomas (ex SST) is a Wolf specialist. It also helps having your own in house Dyno Dynamics dyno :DStarion VR4 wrote:Hey ash, what injecters U running again? If U need U can use my old map that had 450CC running 12PSI, or more correctly my sons fuel map, just to get it started,
:beer
Ash
Get Stroked! 2.3ltr EVO engine
Re: r
So you fuched off from Fuchs? Glad to see you got the job change you wanted, Ash!Barney wrote:Thanks for the offer but I should be OK as i Work for Top Racing now and have plenty of maps. Our tuner Steve Thomas (ex SST) is a Wolf specialist. It also helps having your own in house Dyno Dynamics dyno :D
Ash
Starion nutter since 1988...
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
Re: r
JohnJPC wrote:So you fuched off from Fuchs? Glad to see you got the job change you wanted, Ash!Barney wrote:Thanks for the offer but I should be OK as i Work for Top Racing now and have plenty of maps. Our tuner Steve Thomas (ex SST) is a Wolf specialist. It also helps having your own in house Dyno Dynamics dyno :D
Ash
Yeh, I fuched right off! I left on very good terms and welcome back anytime.
It was a big decision to make, but i think it will work out.
when you want your Wolf let me know as we are the state distributors
Ash
Get Stroked! 2.3ltr EVO engine
- Starion VR4
- almost postwhore
- Posts: 1293
- Joined: Fri Jan 09, 2004 5:08 pm
- Location: Brisbane
Wolf 3D
Ash, were U talking to Natalie at Wolf at all? I have been looking in2 a special price for AuStarion members as well, Nat is mailing some prices back with my 2 ECU that were upgraded (Ver4 & Ver4+), Seeing as yr company is a dealer I won't step on any1's toes. BTW is it started yet? can't hold my breath 2 much longer
Cheers :beer
Cheers :beer
30PSI,2.4L! Wolf 3D Ver 4. VR4 Head.
Who is online
Users browsing this forum: No registered users and 1 guest