TD05 big 16G on to Dash

iXNAY · Post by **iXNAY** » Tue May 02, 2006 6:01 pm

there is a few on here that have done it and no the dump pipe will not bolt up! also need to modify the oil return line and a few other things

check out MRB1s website it shows how it is done!

i doubt you will beable to do it all on a saturday unless you have already got everything ready to go and just put in.

fr335tyl3r · Post by **fr335tyl3r** » Tue May 02, 2006 6:03 pm

Down pipe wont bolt straight up, unless u already have a dump, even then u need a new flange, bolt spacing is different.

Changes reqd:

New adapter from td05 outlet to intercooler piping
Shorten the oil drain pipe
Change the oil feed pipe for a braided one
Small changes to the exhaust manifold
Small changes to the exhaust housing on the turbo
Wastegate adapter bracket

RiceThief · Post by **RiceThief** » Tue May 02, 2006 8:28 pm

Rather than waste dollars getting a custom manifold why dont you just get your starion manifold ported to match the turbine inlet. The flanges on the turbo and manifold are the same and will bolt up just the port holes are different sizes.

iXNAY · Post by **iXNAY** » Wed May 03, 2006 6:19 am

i know what you mean sounds like a good idea too me. aslong as you can close your bonnet!

iXNAY · Post by **iXNAY** » Wed May 03, 2006 6:56 pm

yeah would be alot better run!

JAS · Post by **JAS** » Wed May 03, 2006 7:00 pm

FST4RD Did you buy lees starion???
Silver 12 valve 1986 in think it was??

Austarion

TD05 big 16G on to Dash

Who is online