NEW HERE SAME OLD PROBLEMS
-
- [P] Plater austaz
- Posts: 20
- Joined: Tue Apr 18, 2006 1:09 pm
- Location: BRISBANE
NEW HERE SAME OLD PROBLEMS
GDAY TO ALL MEMBERS .I HAVE A JA THAT HAS NOT HAD PROBLEM IN 2 YEARS, BUT WHEN IT RAINS IT POURS, LATELY MY STAZZAS ABIT GRUMPY ON FIRST STARTUP,MISSES RUNS REALY ROUGH,BUT FINE AFTER IT WARMS UP???.ALSO IVE REPLACED THE ALTERNATOR WITH A 88 L300 UNIT, IT CHARGES BUT IF I HAVE SAY THE HEATER ON, OR LIGHTS, MY BLINKERS WONT BLINK,OR IF I PUT MY FOOT ON THE BRAKE,THEY WONT BLINK,ALSO MY AMP GAUGE NEEDLE FALLS BENETH THE LINE IN THE MIDDLE OF THE GAUGE????NOT GOOD I CANT DRIVE IN THE RAIN,AT NIGHT ,. IM STUCK NEAR BATHURST NSW,I WANT TO GO HOME!!!! SO HAS ANYONE GOT ANY IDEAS?
4 EVA TRUST INWHO WE R AND NUTHIN ELSE MATTERS
maybe the problem of the low amps is due to the alternator you have im sure an L300 van alternator actually has a lower rating than a starion one.
i could be mistaken if i am can someone please correct me.
also i actually live in bathurst NSW were are you?
regards
Ryan
i could be mistaken if i am can someone please correct me.
also i actually live in bathurst NSW were are you?
regards
Ryan
SR20 powered starion what have I done..... :P
-
- [P] Plater austaz
- Posts: 20
- Joined: Tue Apr 18, 2006 1:09 pm
- Location: BRISBANE
BATHURST DUDE
WOW A STAZZA IN BATHURST IM CURRENTLY IN LITHGOW, :) COLD ASS TOWN, WHAT R U DRIVING HAVE U GOT ANY BITS
4 EVA TRUST INWHO WE R AND NUTHIN ELSE MATTERS
-
- [P] Plater austaz
- Posts: 20
- Joined: Tue Apr 18, 2006 1:09 pm
- Location: BRISBANE
-
- [P] Plater austaz
- Posts: 20
- Joined: Tue Apr 18, 2006 1:09 pm
- Location: BRISBANE
no mine is white but i belive i know the starions your talking about i know there is a silver one still floating around but the guy blew up the engine in it.
and the maroon one at a guess would of been bens car when he owned it and lived here it is now owned by freestyler off the forums and lives in sydney
unless your sister seen the maroon staz recently i could be mistaken.
and the maroon one at a guess would of been bens car when he owned it and lived here it is now owned by freestyler off the forums and lives in sydney
unless your sister seen the maroon staz recently i could be mistaken.
SR20 powered starion what have I done..... :P
-
- [P] Plater austaz
- Posts: 20
- Joined: Tue Apr 18, 2006 1:09 pm
- Location: BRISBANE
-
- [P] Plater austaz
- Posts: 20
- Joined: Tue Apr 18, 2006 1:09 pm
- Location: BRISBANE
- fr335tyl3r
- I'm Sorta Reformed!
- Posts: 2073
- Joined: Tue Apr 13, 2004 3:07 am
- Location: Baulkham Hills, NSW
Doesn't mean the rest of the world does. Turn off the caps chief.
Sounds like ixnay picked it the first time, alternator problems if you are having charging issues. Chuck a multimeter between the battery terminals when the car is running, if the voltage is low you've got alternator issues.
Possibly could be that the alternator belt isn't tight enough?
Sounds like ixnay picked it the first time, alternator problems if you are having charging issues. Chuck a multimeter between the battery terminals when the car is running, if the voltage is low you've got alternator issues.
Possibly could be that the alternator belt isn't tight enough?
Multipoint Conversion Underway
http://starions.fr33z3.net/mpi/
http://starions.fr33z3.net/mpi/
L300 alternator is crap! Got me out of a jam at the time for $50 but as stated has a lower amp rating! Doesn't give the battery enough charge!
As for your start problem, it's running too rich! There is a screw on the top of the manifold that says L< >R, turn it left until your sweet! Revs on idle should be 850rpm! :D :beer
As for your start problem, it's running too rich! There is a screw on the top of the manifold that says L< >R, turn it left until your sweet! Revs on idle should be 850rpm! :D :beer
-
- [P] Plater austaz
- Posts: 20
- Joined: Tue Apr 18, 2006 1:09 pm
- Location: BRISBANE
sorry about the capitals guys,i had the original alternator rebuilt it lasted 1 hour!![$120]
paid $75 4 the l300 one,so i should have bought a new one from word go,also,adjusting mixture screw does not help my starting probs!?im thinking maybe a faulty ignitor??
paid $75 4 the l300 one,so i should have bought a new one from word go,also,adjusting mixture screw does not help my starting probs!?im thinking maybe a faulty ignitor??
4 EVA TRUST INWHO WE R AND NUTHIN ELSE MATTERS
Who is online
Users browsing this forum: No registered users and 12 guests