Barney's photo's

[Barney]

Hi Guy's

Here are some up-dated photo's. All the hoses have been done by Enzed since these were taken.

Thanks again to fr33z3 for hosting them :beer

Thanks to Top Racing in Bentley for there help :beer

Engine Bay from passenger side
www.fr33z3.net/starions/engine_passenger.jpg

Oil coooler, Intercooler & Radiator
www.fr33z3.net/starions/coolers.jpg

Engine from the top, taken from the driver side
www.fr33z3.net/starions/engine_top_driver.jpg

Pic of the Turbo and pipe's
www.fr33z3.net/starions/engine_top_turbo.jpg

Photo from underside of the wastegate and screamer pipe
http://www.fr33z3.net/starions/wastegat ... _copy1.jpg

The dreaded gearbox adapter plate
www.fr33z3.net/starions/adapter_plate.jpg

3" exhaust side pipe from under the car
www.fr33z3.net/starions/side_pipe.jpg

Photo taken from the front of the engine also showing the cam gears
www.fr33z3.net/starions/engine_front.jpg

Time for the Bling Bling and pssssshh sound
www.fr33z3.net/starions/bov_catch_can.jpg

I covered the dash and fitted Autometer guages + warning lights, the shift light is not yet fitted
www.fr33z3.net/starions/dash_copy1.jpg

Its hard to take a picture of the roll cage but i thought i would give it a go. Looks a bit messey as the car is full of parts, wiring ect
www.fr33z3.net/starions/cage_from_rear_copy1.jpg

Pic of the 38ltr plastic race tank mounted on custom alloy brackets and clamps. I have cut a hole in the base of plastic tank and bolted a surge tank over the hole. The surge tank then slides thru a hole in the floor of the boot. This saves me from using a lift pump. This pic also shows the Moroso cool can. I have a pic of the underside if you want to see it.
www.fr33z3.net/starions/fuel_tank.jpg

Ash

[SIR GSR]

Very nice.... :beer :beer

[iXNAY]

jelousy = me!

wish i had your engine looks sweet!!!! :drool:

you should be towling up people on the circuit!

[Barney]

you should be towling up people on the circuit!

I hope so, but the 36mm restrictor will make it hard to get the V8's

Ash

[Junkers]

Man thats cool.

Thats going to be a very noisy beast once that turbo starts roaring :D

[Barney]

Thats going to be a very noisy beast once that turbo starts roaring :D

It better be! :D

[mrb1]

Hey Barney hope you did a drawing of the gearbox adapter plate?

[NXTIME]

Looking great Barney :) Whens the big debut?

[Barney]

Hey Barney hope you did a drawing of the gearbox adapter plate?

Hi Mark

No, I was rushed getting the engine in. But im sure the gearbox will be out again soon

Ash

[Barney]

Looking great Barney :) Whens the big debut?

Well thats a good question :?

Next race is the 8th and 9th of April BUT. It still needs wiring and painting.

I would like to have it running by mid April!

I cant wait to hear it running with rotational idle thru a side pipe with no muffler Then come on boost with 26psi and open the wastegate and scream Scream Scream Scream you BASTARD

Ash

[JPC]

Excellent, Ash!

Expect a visit from me soon, but cover it with plastic first to protect it from all the drool

[Barney]

Excellent, Ash!

Expect a visit from me soon, but cover it with plastic first to protect it from all the drool

hi ya John :)

as long as its only drool

[4g6beat]

Thats class ash!, cant wait to see the photos of when it's all done and ready to kick ass twisted:, oh and the photos with the speed blur lines as you zoom around the track hehehe. go the saporro!

[RiceThief]

Looks great barney, cant wait to see some photos of it on the track. :beer

[Barney]

Thanks guy's :beer