Just been fitting a few bits to the starion over the past few weekends so just posting pic's.
Ive fitted two extra fuel injectors and a haltech F5 extra injector driver. A fuel cut defender and a new 2 stage boost controller with high boost set at 18psi. Cant get over the difference in power at high boost now she really flys!!!
I fitted all the gizmos in the glove box so i'll get a pic of that too sometime and maybe abit of film of fire coming out the exhaust too !
:beer
new bits
- honest_jim
- Dorifto!
- Posts: 52
- Joined: Sun Aug 28, 2005 6:22 am
- Location: uk
new bits
Starion 2000 EX.. bosch fuel pump, sard dumpvalve, knN drilled air box, Haltech F5 + 2 injectors, turbosmart FCD + Dual stage boost controller, tublar turbo header, turbo back 2.5" stainless exhaust 4.5" tip, Innovate MS wideband A/F meter.
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
Be aware that at 18psi you are at the absolute limit of the standard pistons. So be careful if you get a bad batch of fuel or something it may die :(
The airflow meter is quite restrictive that's why aftermarket EFI (using MAP sensor) is good because you can remove the airflow meter.
Do you have any dyno numbers at 18psi?
The airflow meter is quite restrictive that's why aftermarket EFI (using MAP sensor) is good because you can remove the airflow meter.
Do you have any dyno numbers at 18psi?
Who is online
Users browsing this forum: No registered users and 68 guests