4g64 manifold of some sort. I dont think this is a ralliart manifold, anyone have any ideas?
anyone know what manifold this is?
-
- Enthusiast
- Posts: 737
- Joined: Wed Feb 02, 2005 2:46 pm
- Location: oregon, USA
- Contact:
anyone know what manifold this is?
'78 Colt cp, 80 challenger "scorpion" 5spd g54bt conversion almost complete, '80 plymtouh arrow "might max" , '90 mitsu terror van "spacewagon"
80's Hero
80's Hero
That is a 4G52 manifold originally. They are an Aussie only thing that was made for a locally produced 'Sigma turbo' in the very early 80s. They have a TO4 flange split pulse and 32mm garret external gate.
Will bolt onto any Astron head including 4G54s & magnas.
I think they are a very well designed manifold with cyl 1&4 and 2&3 paired, though now are showing signs of 25 years of use. Most are cracked where the split pulse area is and there were never a huge amount made. Originally only 500 sigma turbos made & an unknown number of 'kits' sold.
I have one on the shelf with minor cracking if you want to see some detailed pics of one.
http://www.sigmaturbo.com/sigmaturbo_001.htm
Will bolt onto any Astron head including 4G54s & magnas.
I think they are a very well designed manifold with cyl 1&4 and 2&3 paired, though now are showing signs of 25 years of use. Most are cracked where the split pulse area is and there were never a huge amount made. Originally only 500 sigma turbos made & an unknown number of 'kits' sold.
I have one on the shelf with minor cracking if you want to see some detailed pics of one.
http://www.sigmaturbo.com/sigmaturbo_001.htm
4G63 - 87kg
4G54 - 107kg
4G54 - 107kg
-
- Enthusiast
- Posts: 737
- Joined: Wed Feb 02, 2005 2:46 pm
- Location: oregon, USA
- Contact:
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
This manifold was produced by Garrett Australia. The Sigma turbo was a project developed by Garrett Australia and Mitsubishi Australia.
Garrett Australia also sold the systems an aftermarket kit.
The reason why it has a carb is because no cars were sold with fuel injection by Mitsubishi Australia at that time it was developed. The Sigma which was RWD was built here by Mitsubishi Australia with both the G52 2.0 and G54 2.6 engines.
The factory Sigma turbo was a G52 2.0 litre. However the manifolds are the same so will fit on the G54 2.6 as well.
Interestingly Mitsubishi Japan had a version of this car with the same 4G63 2.0 SOHC turbo engine that we have in our OZ Starions. This car was sold in other export markets but not Australia.
This is what the car looked like http://www.cardomain.com/ride/680521/1
Lots more here http://www.cardomain.com/MakeModel/Mitsubishi/Sigma
So in conclusion nothing to do with Ralliart.
Garrett Australia also sold the systems an aftermarket kit.
The reason why it has a carb is because no cars were sold with fuel injection by Mitsubishi Australia at that time it was developed. The Sigma which was RWD was built here by Mitsubishi Australia with both the G52 2.0 and G54 2.6 engines.
The factory Sigma turbo was a G52 2.0 litre. However the manifolds are the same so will fit on the G54 2.6 as well.
Interestingly Mitsubishi Japan had a version of this car with the same 4G63 2.0 SOHC turbo engine that we have in our OZ Starions. This car was sold in other export markets but not Australia.
This is what the car looked like http://www.cardomain.com/ride/680521/1
Lots more here http://www.cardomain.com/MakeModel/Mitsubishi/Sigma
So in conclusion nothing to do with Ralliart.
Last edited by mrb1 on Sat Dec 10, 2005 10:34 pm, edited 1 time in total.
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
They only made 500 factory Turbo Sigmas.. All were 2.0L because apparantly the 2.6 version was deemed to powerful and was banned before production.
It was the second fastest car in its day according to Wheels magazine.GTHO beat it, only just.
Flav,, About 80% of all sigmas ping anyway....
It was the second fastest car in its day according to Wheels magazine.GTHO beat it, only just.
Flav,, About 80% of all sigmas ping anyway....
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
12 sec stocker
hey Guys, I put that pic on www.26liter.us last year
funny how pics fly around the www. ay ??
its my GD galant motor (well 2.6 v571-Magna Block)
with 2 head gaskets & spacer
It was good for 12.4@108 in the Galant then 14.4@87 in my triton
duel cab.
Cheers:Phil.
funny how pics fly around the www. ay ??
its my GD galant motor (well 2.6 v571-Magna Block)
with 2 head gaskets & spacer
It was good for 12.4@108 in the Galant then 14.4@87 in my triton
duel cab.
Cheers:Phil.
TORQUES-CHEAP.
Who is online
Users browsing this forum: No registered users and 25 guests