Any tough car in here

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

I seem to think that this roger guy has no idea about cars. And further more probably couldn't point his finger to the oil cap rather then know anything about performance
special-k
[L] Plates
Posts: 12
Joined: Tue Aug 23, 2005 1:28 pm
Location: Brisneyland

Post by special-k »

Image
King cordia
tosser
Posts: 142
Joined: Mon Aug 22, 2005 4:40 pm
Location: SYDNEY

rrf

Post by King cordia »

I hit a few times by mistake 20 plus psi,and No there was no pinging,at least according to my boost guage,my needle went maximum,were it could move no more, it was there for a few seconds.

In order for my engine not to boost cut,i mada a switch,via the yellow wire,as the needle comes close to 10 psi, i flick the switch and i get no boost cut,but my engine is still getting fuel.i placed the switch on my gear stick.
My dash powerd cordia is like a ferrari,in a cordia chassis.
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

you can't tell if your engine is pinging by your boost guage, what your talking about is your boost spiking.
Me wrote:I seem to think that this roger guy has no idea about cars
Verified
Junkers
Formerly StazzyBabyYeah
Posts: 2338
Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch

Post by Junkers »

you can't tell if your engine is pinging by your boost guage, what your talking about is your boost spiking.
rofl I was waiting for the yellow wire theory

Compulsive liars are amazing, I once met one at a job.. rather than admit to lieing they'll try and lie their way out of things even if it's plain obvious their lieing. It's like something between there senses and their brains gets messed up along the way.
flav
Austarion Occupant
Posts: 3374
Joined: Thu Apr 15, 2004 9:57 pm
Location: Melbourne

Post by flav »

Rodger, Your boost guage is connected to your oil pressure sensor/gallery.
User avatar
scum
I'm Banned!
Posts: 1412
Joined: Fri Jan 09, 2004 12:49 pm
Location: Perth WA

Post by scum »

flav wrote:Rodger, Your boost guage is connected to your oil pressure sensor/gallery.
dont listen to him, he is full of crap too. its connected to the drive tyres. so as your 1.8 unleshes its fury on the tarmac they heat up and expand, hense the needle moves up on the gauge.
I figured out the meaning of life, and since then every day just gets worse.

Warranty void if stupid.
User avatar
merlin
Enthusiast
Posts: 658
Joined: Sun Jan 11, 2004 5:51 pm
Location: Sydney, Australia

Post by merlin »

yet another classic scumy diss.
love it :D
Matt
Dorifto!
Posts: 60
Joined: Tue Feb 10, 2004 3:23 pm
Location: dromana vic

Post by Matt »

fuck u talk some shit cordia BOY, i bet ur a hell geek and trust me u want to earn respaect go to the crusie... ur car will get destoryed and thats running low psi
User avatar
scum
I'm Banned!
Posts: 1412
Joined: Fri Jan 09, 2004 12:49 pm
Location: Perth WA

Post by scum »

merlin wrote:yet another classic scumy diss.
love it :D
thats not how they work?
I figured out the meaning of life, and since then every day just gets worse.

Warranty void if stupid.
User avatar
JustPaus_88TSi
Dorifto!
Posts: 67
Joined: Thu Aug 05, 2004 7:46 am
Location: Az, Usa

Post by JustPaus_88TSi »

Wow. :roll:

Just to let you know Roger.
Us USA-spec StarQuest's have dipped down to 13.7@102. With 1.9s 60 ft's(few 1.8's and 1.7's also.)

3" exhaust.($250)
MBC@15psi($5)
Junkyard 1G DSM MAS($25)
Stock td05-12a
Stock fuel(TBi)
Stock ignition

Stock weight aswell. Roughly 3050lbs without driver.

As for the rest of you :x :x :x ...



:D



:beer
Cheers. :)
Image
88TSI-nicely modded...
01 IS300, GTE swap, 60-1 Garrett, Tein, Volk CE28N etc...
User avatar
StarionPWR
I like starions
Posts: 140
Joined: Sat Aug 21, 2004 6:20 pm
Location: Auckland NZ

Post by StarionPWR »

Kingcordia, how many VR4's or EVO's have you supposedly beaten?
I really think you should remove that from your signature eh.
From the time you say your car does it would be impossible for you to beat an EVO, the odd VR4 maybe you could.
I have owned a VR4 and EVO so know what these cars can do.
Ya cant beat those 6000rpm 4WD launches :twisted: :twisted:
212.6kw ATW
13.4 1/4 mile
King cordia
tosser
Posts: 142
Joined: Mon Aug 22, 2005 4:40 pm
Location: SYDNEY

frfd

Post by King cordia »

2 vr4 powerd cordias-at street
1 original galant vr4 4wd,at wsid
1 evo 4 powerd lancer mr at wsid.

There was another galant vr4 at the wsid which i saw two meets ago,had full paint job,i wanted to race but the car was no competition against mine.It looked normal,with basic mods,zorst intercooler.

Plus i would like to race more vr4 powerd cordias,but not the heavily modified ones,not the ones with thousands spent on engine alone,cos what would be original on the motor,nothing,My car is mechanicaly original.
Im not going to erase my sign cos its true.
My dash powerd cordia is like a ferrari,in a cordia chassis.
Junkers
Formerly StazzyBabyYeah
Posts: 2338
Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch

Post by Junkers »

So is your cordia really fast compared to the other stock cordia's because it's yours?
King cordia
tosser
Posts: 142
Joined: Mon Aug 22, 2005 4:40 pm
Location: SYDNEY

gh

Post by King cordia »

I dont see how a cordia with a vr4 in it or a lancer mr with a evo 4 in it is stock.cordias arnt factory with twincams.
My dash powerd cordia is like a ferrari,in a cordia chassis.
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests