Door mouldings/Part numbers

Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
Post Reply
kiwistar
I like starions
Posts: 138
Joined: Mon Feb 16, 2004 3:16 pm
Location: Auckland

Door mouldings/Part numbers

Post by kiwistar »

Does anyone know the part numbers and availablity of the door mouldings.
These items I refer to are the stell and rubber trims that fit around the rim of the window/s on the doors.

I need to replace the lower ones at least, it detracts from the new paint job on the car having rusty trims.

Any ideas?

Thanks

I did once find them available ex Japan but a set for both doors (3 peices per side) was going to cost $600NZ.
kiwistar
I like starions
Posts: 138
Joined: Mon Feb 16, 2004 3:16 pm
Location: Auckland

Post by kiwistar »

Pleeeease anyone - surely Im not the only one who has rusty door trims.
User avatar
hcca
Enthusiast king
Posts: 884
Joined: Thu Jan 08, 2004 9:24 pm
Location: Brisbane
Contact:

Post by hcca »

Chances of availability of new parts would be approaching zero. Best you could really do without replacing them is to try and paint them.
kiwistar
I like starions
Posts: 138
Joined: Mon Feb 16, 2004 3:16 pm
Location: Auckland

Post by kiwistar »

Thanks HCCA

Not possible because the steel part has rusted to buggery.

I cant be the only one with this problem, every second starion in New Zealand is like this-must be our salty air.
ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

Its true, all starions ive seen here are starting to rust here... mine are going to get a sanding and re-powder coated...

Check your PM's kiwistar.
kiwistar
I like starions
Posts: 138
Joined: Mon Feb 16, 2004 3:16 pm
Location: Auckland

Post by kiwistar »

Ok it seems that no one knows what I am talking about,

Have a look at this link and on the illustration you will see parts 9,10 & 11 are the mouldings. Number 10 & 9 rust the worst in New Zealand.

http://www.trademotion.com/partlocator/ ... atalogid=2

Currently I am trying to convince Conicelli to ship to NZ, if they have the itemas in stock.

Does Australia have such a good environment that Starions dont rust?

Next step is to get them made up in NZ, this is my task for today.
User avatar
hcca
Enthusiast king
Posts: 884
Joined: Thu Jan 08, 2004 9:24 pm
Location: Brisbane
Contact:

Post by hcca »

Yeah, I know they're the parts you meant... they shouldn't rust unless the rubber coating peels off. It does around the corners, but i've never seen any that were so bad that the rubber couldn't just be glued back on, so your car must have seen some pretty extreme elements.
kiwistar
I like starions
Posts: 138
Joined: Mon Feb 16, 2004 3:16 pm
Location: Auckland

Post by kiwistar »

In New Zealand the metal rusts even inside the rubber, damn sea level living.

Its not a lack of care because every Starion except 87s etc have rusty mouldings.
User avatar
scum
I'm Banned!
Posts: 1412
Joined: Fri Jan 09, 2004 12:49 pm
Location: Perth WA

Post by scum »

go for a walk through a car park, you will be surprised how many cars have buts very similar. I haven’t found one like it yet, but I bet there out there.
I figured out the meaning of life, and since then every day just gets worse.

Warranty void if stupid.
Post Reply

Who is online

Users browsing this forum: No registered users and 63 guests