EOI: 2lt sohc 4g63 Brissy/QLD

[scottyb01]

anyone want a 2l sohc 4g63 turbo in Brissy. Will be doing a vr4 conversion and wont need my 2lt anymore.
It was only rebuilt 3000km ago with hyperuectic pistons.
head was checked out too.
turbo not included.
Price: $500 ONO
Bribie island
Scott
0439 555 045

[gotrice?]

is this a cordia or starion motor?

[scottyb01]

its in a cordia but i think it was originally for a starion as it has an oil cooler
and the throttle body is the original cordia one not a starion. the short motor was brand new in 1998 and put in by mitsu, then someone (not me) did a piston in it thus the new pistons.
scotty

[Cordzboy]

The oil cooler has nothing to do with it. The difference between the two engines is the width where it bolts to the bellhousing. Cordia motors won't bolt up to a starion gearbox and vice versa.

[scottyb01]

bugger then. this is what i was told so dont know if its true.
scott

[Starion_Turbo]

when in doubt post pictures, put up a picture of the mystery engine m8

[scottyb01]

okay do to this website and have a browse
http://au.pg.photos.yahoo.com/ph/scott2 ... /my_photos
hope this helps as the engine is still in the car.
scott

[RiceThief]

If you want to know for sure, let me know when the engine is out, i have a gearbox housing that you could compare the block with. Im not too far away from bribie too.

[Sargeant_Khan]

i will take it if it will fit my staz and its a 2litre 4g63
i didnt think they made 4g63 cordias? was this some kind of lancer gsr conversion? or wat?

[scottyb01]

Mistubishi in Sydney fitted it. it was Brand new 6 yrs ago. 1.8 lt engines were not availible. not sure when it will be coming out as im building a vr4 for mine. All i need is a vr4 block and computer with loom and im done.
scott