Barney's update

Barney · Post by **Barney** » Tue Aug 16, 2005 1:32 am

Hi Guy's

Im getting excited over my car (Not that type of excitment), so i thought i would let you know where im up to.

Car has been stripped, all sound bitumen removed, all internal panel sealant removed and it is now fully seam welded :)

Today I towed it to Steve Maitland Racecar fabrication for the custom weld in roll cage made to Cams 3J (Improved Production) specs. I should have it back by the weekend :)

I have the JE Forged racing pistons with ceramic coating and the Eagle H Beam rod are on the way. I have a Stainless steal exhaust manifold with T3 flange, 45mm External wastegate. A custom intake manifold and plenum is curently being built by Grant at Per4manz Turbo's, Grant is also organising the Ball Bearing ITS Turbo. The fuel tank has been removed and i am now using a 38ltr plastic race tank that sits on the boot. I have made a surge tank that bolts up to the base of the new tank. The surge tank then goes thru a hole in the spare tyre well to the exterior of the car. A Bosch 910 pump will then suck straght from the surge tank, no lift pump required :)

+ Lots more expensive things that I just cant remember at the moment :(

So when i get the car back. I will dummy fit everything , then off to the panel beaters :D

ASH

tmz_99 · Post by **tmz_99** » Tue Aug 16, 2005 2:00 am

are you still going DOHC with the whole thing ash? :)
Sounds like everything is coming together..:D :D

Barney · Post by **Barney** » Tue Aug 16, 2005 11:59 am

tmz_99 wrote:are you still going DOHC with the whole thing ash? :)
Sounds like everything is coming together..:D :D

Yep DOHC :D :D :D :D

45mm external watsegate to atomospher :D :D

tmz_99 · Post by **tmz_99** » Tue Aug 16, 2005 12:52 pm

what brand of wastegate? I was thinking of getting a turbosmart, simply as it's a good aussie built product and cheaper as compared to tial or hks...

Barney · Post by **Barney** » Tue Aug 16, 2005 11:34 pm

tmz_99 wrote:what brand of wastegate? I was thinking of getting a turbosmart, simply as it's a good aussie built product and cheaper as compared to tial or hks...

China one!

flav · Post by **flav** » Wed Aug 17, 2005 12:43 am

Matey, that sounds all very lush and almost sexual.....except for the ceramic coated pistons. We used these in the GRPA cars and they were prone to failure on the first sign of detonation. I know they were tried on the sierras with no luck as well, and the Nissans at Gibson.
Unless there has been a big improvement in ceramic bonding technology you may have problems.

tmz_99 · Post by **tmz_99** » Wed Aug 17, 2005 2:23 am

from various reading and research I have succumbed to the idea VR4 pistons are good to about 22psi, as long as you have a metal head gasket the engine SHOULD hold out....

Barney · Post by **Barney** » Thu Aug 18, 2005 3:53 pm

flav wrote:Matey, that sounds all very lush and almost sexual.....except for the ceramic coated pistons. We used these in the GRPA cars and they were prone to failure on the first sign of detonation. I know they were tried on the sierras with no luck as well, and the Nissans at Gibson.
Unless there has been a big improvement in ceramic bonding technology you may have problems.

Hi Flav

Ceramic coating is proving to be the way to go in the rice drag cars over here. I surpose i will find out.

Only the skirts are coated!

ASH

Barney · Post by **Barney** » Fri Aug 19, 2005 7:24 pm

Cage is in and it makes me want to

fr335tyl3r · Post by **fr335tyl3r** » Fri Aug 19, 2005 7:27 pm

photosoritdidnthappen

Austarion

Barney's update

Barney's update

Who is online