EOI: 2lt sohc 4g63 Brissy/QLD

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
Post Reply
scottyb01
[L] Plates
Posts: 18
Joined: Wed Aug 17, 2005 3:38 pm
Location: Bribie Island

EOI: 2lt sohc 4g63 Brissy/QLD

Post by scottyb01 »

anyone want a 2l sohc 4g63 turbo in Brissy. Will be doing a vr4 conversion and wont need my 2lt anymore.
It was only rebuilt 3000km ago with hyperuectic pistons.
head was checked out too.
turbo not included.
Price: $500 ONO
Bribie island
Scott
0439 555 045
cordia/vr4 conversion on the way
gotrice?
Enthusiast king
Posts: 870
Joined: Thu Sep 16, 2004 11:29 am
Location: broome broome

Post by gotrice? »

is this a cordia or starion motor?
I'm Back
scottyb01
[L] Plates
Posts: 18
Joined: Wed Aug 17, 2005 3:38 pm
Location: Bribie Island

Post by scottyb01 »

its in a cordia but i think it was originally for a starion as it has an oil cooler
and the throttle body is the original cordia one not a starion. the short motor was brand new in 1998 and put in by mitsu, then someone (not me) did a piston in it thus the new pistons.
scotty
cordia/vr4 conversion on the way
User avatar
Cordzboy
I like starions
Posts: 109
Joined: Sat Mar 06, 2004 1:09 pm

Post by Cordzboy »

The oil cooler has nothing to do with it. The difference between the two engines is the width where it bolts to the bellhousing. Cordia motors won't bolt up to a starion gearbox and vice versa.
Cordia, powered by EVO...
scottyb01
[L] Plates
Posts: 18
Joined: Wed Aug 17, 2005 3:38 pm
Location: Bribie Island

Post by scottyb01 »

bugger then. this is what i was told so dont know if its true.
scott
cordia/vr4 conversion on the way
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

when in doubt post pictures, put up a picture of the mystery engine m8
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
scottyb01
[L] Plates
Posts: 18
Joined: Wed Aug 17, 2005 3:38 pm
Location: Bribie Island

Post by scottyb01 »

okay do to this website and have a browse
http://au.pg.photos.yahoo.com/ph/scott2 ... /my_photos
hope this helps as the engine is still in the car.
scott
cordia/vr4 conversion on the way
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

If you want to know for sure, let me know when the engine is out, i have a gearbox housing that you could compare the block with. Im not too far away from bribie too.
Last edited by RiceThief on Mon Aug 22, 2005 6:11 pm, edited 1 time in total.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
User avatar
Sargeant_Khan
Enthusiast
Posts: 673
Joined: Thu Dec 16, 2004 9:31 pm
Location: Ipswich

Post by Sargeant_Khan »

i will take it if it will fit my staz and its a 2litre 4g63
i didnt think they made 4g63 cordias? was this some kind of lancer gsr conversion? or wat?
Image
PIZZA DELIVERY GUY....No more
scottyb01
[L] Plates
Posts: 18
Joined: Wed Aug 17, 2005 3:38 pm
Location: Bribie Island

Post by scottyb01 »

Mistubishi in Sydney fitted it. it was Brand new 6 yrs ago. 1.8 lt engines were not availible. not sure when it will be coming out as im building a vr4 for mine. All i need is a vr4 block and computer with loom and im done.
scott
cordia/vr4 conversion on the way
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests