Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
RiceThief
my mangina paid for my staz
Posts: 2129 Joined: Thu Jan 15, 2004 1:23 pmLocation: Brisbane
Post
by RiceThief Tue Aug 09, 2005 9:24 pm
Does anyone know if cordia seats will fit into a starion? Do the bolt holes line up? Thanks.
bigmoz
Enthusiast king
Posts: 886 Joined: Thu Jan 22, 2004 1:04 pmLocation: Melbourne Australia
Post
by bigmoz Wed Aug 10, 2005 10:24 pm
why would you want to? starions have awesome seats!!!!!!
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (
chopyou@hotmail.com )
RiceThief
my mangina paid for my staz
Posts: 2129 Joined: Thu Jan 15, 2004 1:23 pmLocation: Brisbane
Post
by RiceThief Wed Aug 10, 2005 11:08 pm
I've got a fixed bucket seat and i didnt want to rip apart my starion seat just for the rail, i was hoping that cordia seats fit so I can use the rails on them. Thanks.
JPC
almost postwhore
Posts: 1016 Joined: Fri Feb 13, 2004 9:25 pmLocation: Perth, WA
Post
by JPC Thu Aug 11, 2005 2:05 am
I don't know if Cordia seats fit, but I know for sure that GJ Scorpion seats do. I picked one up from a wreckers for $20 and used it while I had one of my Staz ones re-trimmed.
Starion nutter since 1988...
RiceThief
my mangina paid for my staz
Posts: 2129 Joined: Thu Jan 15, 2004 1:23 pmLocation: Brisbane
Post
by RiceThief Thu Aug 11, 2005 11:49 pm
thanks for the reply jpc, are scorpion and sigma interiors similar does it have to be a gj scorpion. Thanks
JPC
almost postwhore
Posts: 1016 Joined: Fri Feb 13, 2004 9:25 pmLocation: Perth, WA
Post
by JPC Fri Aug 12, 2005 2:18 am
RiceThief wrote: thanks for the reply jpc, are scorpion and sigma interiors similar does it have to be a gj scorpion. Thanks
I have no idea about the Sigma, but the guy at the wreckers was of the opinion that Scorp seats from GJ onwards are a direct fit. I looked at some Cordia ones at the same time, and they looked like they should fit, but couldn't verify.
Starion nutter since 1988...
scum
I'm Banned!
Posts: 1412 Joined: Fri Jan 09, 2004 12:49 pmLocation: Perth WA
Post
by scum Fri Aug 12, 2005 8:41 am
cordial ones dun fit. tried it. :(
I figured out the meaning of life, and since then every day just gets worse.
hcca
Enthusiast king
Posts: 884 Joined: Thu Jan 08, 2004 9:24 pmLocation: Brisbane
Contact:
Post
by hcca Fri Aug 12, 2005 11:58 am
are scorpion and sigma interiors similar does it have to be a gj scorpion
Pretty sure the sigma is the same - it's only the GJ-GK that will fit though.
RiceThief
my mangina paid for my staz
Posts: 2129 Joined: Thu Jan 15, 2004 1:23 pmLocation: Brisbane
Post
by RiceThief Sat Aug 20, 2005 7:27 pm
thanks for the reply guys, can you recommend a wrecker in brisbane hcca?
INP51
I like starions more
Posts: 157 Joined: Sat Jul 10, 2004 6:03 pmLocation: Brisbane
Post
by INP51 Tue Aug 23, 2005 12:29 pm
dont forget to get the fixed back seat plated or the cops will have a field day with ur stazz ...
Why drink n drive when u can drift n slide ?
hcca
Enthusiast king
Posts: 884 Joined: Thu Jan 08, 2004 9:24 pmLocation: Brisbane
Contact:
Post
by hcca Tue Aug 23, 2005 5:53 pm
Salisbury is usually ok - ring up and get a quote first as it usually makes it a lot cheaper though :)
Users browsing this forum: No registered users and 78 guests
