STRUT BRACE ORDER INFO

Brent · Post by **Brent** » Mon Jul 04, 2005 10:31 pm

Hey Grumbly, is it just that you dont check your PMs?

grumbly · Post by **grumbly** » Tue Jul 05, 2005 6:42 pm

heheheh...me bad boy...
plus I no longer seem to get email confirmation of PM's.....
I work 5.5 days a week
I also have TAFE, wife, 2 kids....yes, time is an issue.
But thankyou for your payment, you are one of only 2 who have paid so far :D

Website · Post by **WidebodyWoody** » Tue Jul 05, 2005 6:55 pm

grumbly, I am going to be paying you for two front strut braces soon. Do I get the price of the two like stated for the front and back, or is it just two lots of the front? Just need to know for when I transfer the money. Thanks

GADGET · Post by **GADGET** » Tue Jul 05, 2005 7:41 pm

Starion Turbo, Grumbly, Toysrus. With the rear one. I have 6x9 speakers in parcel shelf. Will it foul on them? Obviously holes in trim will be required.

grumbly · Post by **grumbly** » Tue Jul 05, 2005 7:44 pm

The bar goes about 1inch behind the shock mounts, so it should be ok. also, you can turn the bar upside down.

GADGET · Post by **GADGET** » Tue Jul 05, 2005 8:01 pm

I was more interested in the height above the strut mounts.

I have around 40mm from the top of the strut tower. If the brace can be put in upside down then there should be the room?

If I could try the test bar in the car sometime it would be appreciated. I saw the final product from the cordia power people. Looks great but welds seem a bit small for my liking? If they were to fail it would have already happened though.

grumbly · Post by **grumbly** » Tue Jul 05, 2005 8:24 pm

Cordia's had Tig welded stainless steel, these are Mig welded 3mmHRPO mild steel. Welds will be larger.
Also, the forces act parrallel to the welds, not perpendicular, so strength of the welds is not a major issue.
Bar sits only 10-20mm above the height of the bolts.
With bar inverted there should be plenty of room.
You are welcome to try the test bar, just let me know when you want to meet up ( I am in the Blakeview/ Munno Para area)

GADGET · Post by **GADGET** » Tue Jul 05, 2005 8:30 pm

Sounds like a goer...
When is it better for you to meet weekdays, afternnons(after 3ish), weekends.

During the week of the 18th to 22nd I will be on holidays, so could easily sort something out then. If all fits well I will hand you the cash there and then.

grumbly · Post by **grumbly** » Thu Jul 07, 2005 9:21 pm

weekends are best for me, unless you actually want to venture to my abode after 6pm weeknites...

flav · Post by **flav** » Fri Jul 08, 2005 12:46 am

bloody cordials... :D

GADGET · Post by **GADGET** » Fri Jul 08, 2005 5:58 pm

grumbly wrote:weekends are best for me, unless you actually want to venture to my abode after 6pm weeknites...

Like I said holidays on in a few weeks. So could make it after 6pm then. I have sent you a PM

toysrus · Post by **toysrus** » Fri Jul 08, 2005 8:40 pm

flav wrote:bloody cordials... :D

Mine will be on alcohol once that order comes through Flav, I hope your not sabotagging it purposely :P

zaidja83 · Post by **zaidja83** » Sun Jul 10, 2005 7:36 pm

You have transfer confirmation for the rear strut brace.

grumbly · Post by **grumbly** » Sun Jul 10, 2005 7:48 pm

TY, replied to.

Anyone else looking at a purchase soon? Need a few more so I can order these bars from Whiteline....Unless someone here's gonna give me a grand or so :D

Website · Post by **WidebodyWoody** » Sun Jul 10, 2005 8:55 pm

I am ordering 2 remember, and you should have your money either this week, or early next week.But I am reasonably sure it is this week. Just waiting for the cheque to clear.

Austarion

STRUT BRACE ORDER INFO

Question bout braces:

Who is online