This looks familiar
This looks familiar
http://www.cardomain.com/ride/1236294
Okay got sick of clicken back to the site so heres some of the more interesting pics
Okay got sick of clicken back to the site so heres some of the more interesting pics
Last edited by gotrice? on Tue Jul 05, 2005 2:41 pm, edited 1 time in total.
I'm Back
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
I like that intercooler piping setup, bet mine wont come out half as good when its time. no way im loosing washer bottles to put in IC piping though.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
- SpidersWeb
- postwhore!
- Posts: 1984
- Joined: Wed Jan 28, 2004 2:29 am
- Location: Wellington, NZ
Yeah the intercooled Starions have a different design if ya didnt know. Thankfully I got me a spare 'intercooler' Starion bottle :)Starion_Turbo wrote:I like that intercooler piping setup, bet mine wont come out half as good when its time. no way im loosing washer bottles to put in IC piping though.
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
- SpidersWeb
- postwhore!
- Posts: 1984
- Joined: Wed Jan 28, 2004 2:29 am
- Location: Wellington, NZ
rather than finding some dinky little place, its easier to use the other bottle if you have one lying around (like me). It mounts in the same place but the water is held underneath the air canister to provide sufficent room for both cooler pipes to go past.StazzyBabyYeah wrote:I thought you could just move it to make clearing for the already existing hole?
Some people just use the headlight washer instead. I mean really, do we need a headlight washer? Doesnt even have the wiper blades, might as well wait for a good puddle.
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
Yeah i though of ditching the headlight washer set up aswell but then though i might rig up an intercooler sprayer out of it.
By the by i just ordered the my intercooler 600 x 300 x 76mm
By the by i just ordered the my intercooler 600 x 300 x 76mm
Last edited by gotrice? on Thu Jun 30, 2005 4:24 pm, edited 1 time in total.
I'm Back
- SpidersWeb
- postwhore!
- Posts: 1984
- Joined: Wed Jan 28, 2004 2:29 am
- Location: Wellington, NZ
Mine doesn't work anymoreStazzyBabyYeah wrote:rofl
Could say the same about the little tune that plays whilst opening the door, I like it though :D
I miss my door chimes
I also miss being able to turn, but thats a whole different bag of fish.
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
If you really wanted im sure you could set up IC spray to cut in at certain boost on a aftermarket computer system or on the TPS, to make it fully automated.
I also have considered using light washer spray for IC water sprayer as it already has a relay setup and I replaced the pump and bottle a few months ago so it would work again.
I also have considered using light washer spray for IC water sprayer as it already has a relay setup and I replaced the pump and bottle a few months ago so it would work again.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
- SpidersWeb
- postwhore!
- Posts: 1984
- Joined: Wed Jan 28, 2004 2:29 am
- Location: Wellington, NZ
Who is online
Users browsing this forum: No registered users and 64 guests