kW rating?

iXNAY · Post by **iXNAY** » Thu Jun 23, 2005 6:29 pm

hey guys.
just wondering what kW all you guys have at the wheels? and what your kW goal is?

i have 120rwkW on 15PSI

i would like to crack the 200kW mark.

greetz

CussCuss · Post by **CussCuss** » Thu Jun 23, 2005 6:57 pm

120rwkw @11psi 'happy' dyno

StarionPWR · Post by **StarionPWR** » Thu Jun 23, 2005 7:33 pm

212kw at the wheels at 14psi

mrb1 · Post by **mrb1** » Thu Jun 23, 2005 7:49 pm

149kW @ 15.5 psi JA 2.0 and 182kW @ 16psi 2.6 Widebody.

Goals MORE :)

hcca · Post by **hcca** » Thu Jun 23, 2005 9:57 pm

I am aiming for 300kw at the wheels @10psi.. currently I have 0kw so there's a bit of work to be done :)

iXNAY · Post by **iXNAY** » Thu Jun 23, 2005 10:14 pm

hcca wrote:I am aiming for 300kw at the wheels @10psi.. currently I have 0kw so there's a bit of work to be done

nearly there only a little bit to go :)

hcca · Post by **hcca** » Thu Jun 23, 2005 11:07 pm

It goes fast downhill :)

SIRIUS · Post by **SIRIUS** » Fri Jun 24, 2005 12:39 am

101.6kw @ 9psi rofl

Starion_Turbo · Post by **Starion_Turbo** » Fri Jun 24, 2005 1:01 am

I'll share when my intercooler arrives, I get piping and have a dynotune

bigmoz · Post by **bigmoz** » Fri Jun 24, 2005 11:56 am

111@7psi that was 1000km after i had the car rebuilt dont know what i would do now

bigmoz :pimp

tmz_99 · Post by **tmz_99** » Sat Jun 25, 2005 2:29 am

im hoping for 500-550hp at the engine, so between 350-370 at the wheels would be nice :)

Fuel · Post by **Fuel** » Mon Jun 27, 2005 9:13 pm

Currently 151rwkw on 15psi and 120rwkw on 9psi

Around 150 is plenty for a street car.

starion4me · Post by **starion4me** » Tue Jun 28, 2005 8:11 am

234kw@wheels 21psi. Im not after anymore power. Time to focus on the looks of the car

Website · Post by **WidebodyWoody** » Tue Jun 28, 2005 9:28 am

I am aiming for 300kw at the wheels @10psi.. currently I have 0kw so there's a bit of work to be done

WOW, you have more then me.

Seriously though, I can't remember hom much I have at the wheels. Whats 250rwhp? Because I have that on 9psi.

And that should hopefully go up when I get to put boost up and the new inlet system, and cooler piping.

hcca · Post by **hcca** » Tue Jun 28, 2005 9:53 am

250hp=186kw

300kw=402hp

Remember that this is my engine bay (and that number shouldn't be too difficult to achieve at 10psi):

Austarion

kW rating?

kW rating?

...

Who is online