Haltech E6K

iXNAY · Post by **iXNAY** » Sun May 29, 2005 5:52 pm

hey,
does anyone else have a Haltech E6K in there starion?
just wondering if anyone has made some maps that have like lean fuel mixtures, then ones of when you take your car to the track, etc.. etc..

thanks.

MrGenius · Post by **MrGenius** » Mon May 30, 2005 10:13 am

The later versions of firmware for the E6K have dual mapping, this is versions after 6.34 but unless you know the right people you wont get it.
If the car is tuned correctly in the first place there is no need for 2 or more different tunes unless you are using different fuels i.e. pump fuel and avgas or c16.

Website · Post by **WidebodyWoody** » Mon May 30, 2005 10:42 am

I have a map for a E6X for a 2.6litre with a GT35 turbo. but thats about it

Will · Post by **Will** » Mon May 30, 2005 5:13 pm

MrGenius wrote:The later versions of firmware for the E6K have dual mapping, this is versions after 6.34 but unless you know the right people you wont get it.
If the car is tuned correctly in the first place there is no need for 2 or more different tunes unless you are using different fuels i.e. pump fuel and avgas or c16.

MrGenius - iXNAY knows the right people

His car has a touched up Hitman map in it that is quite conservative.

iXNAY, be wary of maps from other cars - if they tune them to the edge, then it might be just over the edge on your car. Have a talk to some EFI tuners that have worked with E6K's a lot. I can give you some numbers to call if you like. You might be happy with just the full load and cruise load points optimised. Its worth getting it right the first time and its worth the money - just ask CussCuss about how much of a difference a good tune made to his car.

AXELR8 · Post by **AXELR8** » Tue May 31, 2005 5:48 pm

I have an E6K in my staz, and I think it's due for a tune...... I just need to find someone I can trust to do the job properly....

gotrice? · Post by **gotrice?** » Tue May 31, 2005 5:55 pm

do all fuel computers have the ablity to load maps?
just cause i'd would love to go to multi point but i have no one up here to tune in the computer

Will · Post by **Will** » Tue May 31, 2005 6:07 pm

AXELR8 wrote:I have an E6K in my staz, and I think it's due for a tune...... I just need to find someone I can trust to do the job properly....

Check out:

http://www.haltech.com.au/aus.htm#4

iXNAY · Post by **iXNAY** » Tue May 31, 2005 6:32 pm

i live in bathurst so its going to be hard to find someone that actually knows what they are doing with tuning, i would most likely have to goto sydney

AXELR8 · Post by **AXELR8** » Wed Jun 01, 2005 2:43 pm

Will wrote:
AXELR8 wrote:I have an E6K in my staz, and I think it's due for a tune...... I just need to find someone I can trust to do the job properly....
Check out:

http://www.haltech.com.au/aus.htm#4

Cheers for the link Wil..... couple of those are close to me, will have to check it out pretty soon.

Chryzla · Post by **Chryzla** » Wed Jun 01, 2005 3:01 pm

pity theres not a decent car behind the haltech :roll:

AXELR8 · Post by **AXELR8** » Tue Jun 07, 2005 8:38 am

like?

Austarion

Haltech E6K

Haltech E6K

Who is online