ja tires

Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
Post Reply
starion84
Big Dorifto
Posts: 91
Joined: Thu Jan 08, 2004 9:25 pm
Location: Tasmania

ja tires

Post by starion84 »

Hi,
was just wondering what siz/brand of tires people are running on there JA rims, if anyone has still got there stock rims.
Chris 83JA
almost postwhore
Posts: 1015
Joined: Sat Jan 10, 2004 12:02 pm
Location: Ballarat, Victoria, Australia
Contact:

Post by Chris 83JA »

On my stock rims, i'm running a little smaller profile 195/65R14's, helps get rid of a bit of sidewall flex, slightly lowers the cars centre of gravity, slightly increase it's acceleration and slightly throws the speedo out.

*Disclaimer: These effects are all very slight, if not entirely imagined

Before that I had slightly bigger ones, Pirelli P6000 215/65R14's. They were nice, but made the car look a bit like a 4wd. Had to have the pressure very high or they'd flex a bit around corners
User avatar
Will
Mine is bigger than yours
Posts: 333
Joined: Sun Jan 11, 2004 10:30 am
Location: Sydney
Contact:

Post by Will »

I got Yokohama A509 215/65R14. Good tyres, but in hindsight I would've gone 215/60R14 or something smaller in diameter than what I got. The gearing in a Staz is already a bit too tall, don't make it worse.
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

currently running positraction 215, 65 R14 (stock alloys) on front due to low cost ($79 / tyre)

have very well worn bridgestone sf-340 eager 225, 60 , r14 rear soon to be replaced with either hancook 225, 65 r14 ($107 / tyre) or
if they pop real soon may have to put same as front on the back.

Can you tell im on a budget?
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
User avatar
rosco
Big Dorifto
Posts: 93
Joined: Sun Apr 25, 2004 8:34 pm
Location: North Balwyn

Post by rosco »

Chris 83JA wrote: but made the car look a bit like a 4wd.
chris don't lie you really had a lift kit on it so you could go 4wding up whoop whoop where you live
User avatar
SpidersWeb
postwhore!
Posts: 1984
Joined: Wed Jan 28, 2004 2:29 am
Location: Wellington, NZ

Post by SpidersWeb »

On the 'JA' - 195/65/14, factory is 195/70/14, so there is a 3% difference there. Cant remember the brand, but they make a squeal noise, and that helps me sleep at night.

On the 'JB' - 215/65/15 factory, and thats whats on it. According to our friend miata.net, 215/60/15's would match the speedo better. Tyres are poo Firestones. Although judging the way the 65 buldge out like some fatty just hopped it, its probably bang on.
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
starion84
Big Dorifto
Posts: 91
Joined: Thu Jan 08, 2004 9:25 pm
Location: Tasmania

tires

Post by starion84 »

thanx guys, i want to really get a set of decent rims for the starion but i live up a dirt raod and the new rims would probly just get chipped alot.
i currently have some old 215/60/14 optimo plus, but i dont think any tire manafacture makes this size anymore so i found the closest thing there
Yokohama S306 205/60/14
User avatar
SpidersWeb
postwhore!
Posts: 1984
Joined: Wed Jan 28, 2004 2:29 am
Location: Wellington, NZ

Post by SpidersWeb »

From the tyre calculator toy:
Speedometer reading with non-stock tyre is 4.3% too fast
When your speedo reads 100KPH you are actually travelling 95.7KPH
Looks fine to me. Over here we have a 10% tolerance for such things.
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
Post Reply

Who is online

Users browsing this forum: No registered users and 64 guests