FS:JA STARION/SR20DET CONVERSION(GEELONG)

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
Post Reply
Midnightblue
[L] Plates
Posts: 16
Joined: Tue Jan 27, 2004 2:00 pm
Location: MELBOURNE

FS:JA STARION/SR20DET CONVERSION(GEELONG)

Post by Midnightblue »

Hi Everyone, :o
FOR SALE:
MITSUBISHI STARION 82
- WITH IMPORTED SR20DET ENG. AND GEARBOX
- RED TOP MOTOR FROM 180 SX HALF CUT
- FACTORY ECU
- HKS BOV
- FRONT MOUNT INTERCOOLER
- POD FILTER
- 3' DUMP PIPE
- 3' HI FLOW CAT AND EXHAUST
- 3' STAINLESS MUFFLER
- GFB STAGE 1 BOOST CONTROLLER
- FET DIGITAL TURBO TIMER
- CALIBRATED TACHO AND SPEEDO
- KENWOOD OR JVC CD
- LONG REGO
DYNOED RECENTLY AT GEELONG TUNE UP SPECIALIST,
135KW @RW .
THERE IS MUCH MORE POTENTIAL FOR THIS CAR BUT UNFORTUNATELY CAN NO LONGER COMMIT TO PROJECT AS OTHER FINACIAL MATTERS NEED ATTENTION.
I WILL POST PICTURE ONCE I KNOW HOW TO, I'M OPEN TO OFFERS OVER 4K
ANY SERIOUS BUYERS ARE WELCOME TO CALL ME ON : 0405260087 OR EMAIL ME: tran@jc.com.au
evogalant
I like starions
Posts: 132
Joined: Sat Jan 10, 2004 4:28 pm
Location: Adelaide - the sleeper state

Post by evogalant »

how much boost was it runnig to get 135kw?
Midnightblue
[L] Plates
Posts: 16
Joined: Tue Jan 27, 2004 2:00 pm
Location: MELBOURNE

Post by Midnightblue »

it was running only stock boost at the time, 135kw @7psi and will beat most stock 180sx's.
decoy
Let Me Out!
Posts: 4424
Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:

Re: FS:JA STARION/SR20DET CONVERSION(GEELONG)

Post by decoy »

midnightblue wrote:I WILL POST PICTURE ONCE I KNOW HOW TO
underneath where u write the subject there is a button named 'Img'. u can either:
press 'Img' then write/past the URL, then press 'Img' again
or
write/paste the URL, highlight it, then press the 'Img' button

if u don't have any webspace, i beleive people use a place called Pbase to host their pics. keep in mind they don't let you remote link to your pictures.
ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

i can host your pics and put them up iun the thread if you like, email them to me at zperston@paradise.net.nz dont worry about how big they are, i can hack it :)
User avatar
Project2501
I like starions more
Posts: 187
Joined: Thu Jan 08, 2004 5:50 pm
Location: Melbourne

Post by Project2501 »

midnightblue: do you remember a run in with an orange 180sx with white rims over the holiday season? My friend was pretty impressed with the performance of your machine..

cheers

tom.
..More than meets the eye..
Midnightblue
[L] Plates
Posts: 16
Joined: Tue Jan 27, 2004 2:00 pm
Location: MELBOURNE

Post by Midnightblue »

project2501: hey man wat a small world!!
i remember quiet clearly, it was a nice cool night and lucky enough to bump into u guys, with 4 people in my car and 2 in urs it was a pretty good match although i must admit u were creepin up !!
wat mods does ur friends 180sx have and wat boost was he running at the time?? :beer
User avatar
4G63JET
Lil' Dorifto
Posts: 44
Joined: Thu Jan 08, 2004 10:06 pm

hahah

Post by 4G63JET »

You wont chop my 180 - ill blow the doors off ya.

Got 280-290 rwhp?

rofl
Get it to Wheelspin Uncontrollably, then add another 10 Pound boost
Midnightblue
[L] Plates
Posts: 16
Joined: Tue Jan 27, 2004 2:00 pm
Location: MELBOURNE

Post by Midnightblue »

another sr20 friend or foe?
dunno but i can tell u there is always someone bigger and better out there. i'm not here to insult anyone, just trying to sell my beloved starion.
although the 180sx's are great cars my starion will have the advantage of shorter tailshaft(more responsive power). 300hp is not very hard to achieve at all with these engines and is nothing much to brag about.
simple mods and bolt on products will get power figures of over 500hp, eg. bigger turbo to3/to4e, better manifold, aftermarket ecu or chip up the factory, z32 airflo meter, bigger throttle body, injectors , fuel pump ect...
User avatar
4G63JET
Lil' Dorifto
Posts: 44
Joined: Thu Jan 08, 2004 10:06 pm

hahahah

Post by 4G63JET »

I am a freind.

More response you say? I have a Ray Hall GT2530 ballbearing turbocharger. Got lag?

Mind you, I when the car pulled 240 RWHP, it was a SST automotive in Perth (perths best dyno) and made 240 on 8 psi of boost, a turbosmart bleed valve.

It now runs a Profec B boost controller and 15 PSI ,a BIKIrom chip with a wicked new Fuel map and (speed/fuel/boost cut remover)and will soon be getting a set of Nismo 550cc injectors +malpassi rising rate Fuel reg.- with 22 PSI on board, im hoping for around 400 rwhp.

But putting a SR20DET in a Starion is just awesome - i dont know why your selling it - if u were in PErth - i would buy it off ya.

Cheers
Kim
Get it to Wheelspin Uncontrollably, then add another 10 Pound boost
User avatar
Project2501
I like starions more
Posts: 187
Joined: Thu Jan 08, 2004 5:50 pm
Location: Melbourne

Post by Project2501 »

His 180 has an intercooler, boost controller and exhaust. It's also in the most recent issue of Hot4's at the back, along with my friend's black Skyline. He (180 guy) was telling me how you were pulling away until he flicked the switch... Would have been a race to see!

Anyway, good luck with your sale dude. From what I hear its one mean piece of kit.

Cheers

tom.
..More than meets the eye..
dirtysanchez

Post by dirtysanchez »

Sold!
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests