Exhaust manifold repair

Paradoxx · Post by **Paradoxx** » Mon Oct 18, 2004 1:07 pm

Hey guys, was wondering if anyone knew of any places in perth who can repair my custom manifold at a good price? It has a crack around one of the welds on the number four runner. It is at the top of my list of things to fix before i get it tuned.

Steve :beer

Paradoxx · Post by **Paradoxx** » Wed Oct 20, 2004 6:33 pm

Anyone??

starion.gsrvr · Post by **starion.gsrvr** » Thu Oct 21, 2004 6:53 am

check it only 1 crack many manifolds made from wrong stainless..is easy job if you stuck send it to me but i gold coast with postage and i will do for free.............

MrBishi · Post by **MrBishi** » Thu Oct 21, 2004 8:11 am

What material is it made from? Mild or stainless? Thin wall or thick? Tig welded or mig?

Are you taking the manifold off to get repaired or in situ?

tmz_99 · Post by **tmz_99** » Thu Oct 21, 2004 1:47 pm

take it to RPW

Paradoxx · Post by **Paradoxx** » Thu Oct 21, 2004 6:57 pm

I'll be taking it off first.
I think its like steam pipe... dunno how it was welded.

I have heard bad things about RPW

Cookiemonster · Post by **Cookiemonster** » Thu Oct 21, 2004 7:11 pm

Paradoxx wrote:I have heard bad things about RPW

So have I.

MrBishi · Post by **MrBishi** » Fri Oct 22, 2004 7:38 am

Paradoxx wrote:I have heard bad things about RPW

I have dealt with them and never will again. enough said.

If its just a mild steel steam pipe manifold, anywhere with a half decent mig welder will be able to fix it. Just take it to your local welder/fabricator/exaust shop.

hoongirl · Post by **hoongirl** » Fri Oct 22, 2004 9:01 am

Paradoxx wrote:I have heard bad things about RPW

Me too :x

tmz_99 · Post by **tmz_99** » Fri Oct 22, 2004 11:11 am

but they have a 350hp magna, so they must be great.. :D and they support MOGWA which is obviously one of the premier mitsubishi enthusiast clubs in australia, if not the world.. :D Dont forget about their extensive in house design and many kits sent overseas :D RPW rock the boat..w00t..:P :D

Paradoxx · Post by **Paradoxx** » Sun Oct 24, 2004 11:01 pm

How much do they pay you?

NachoMan · Post by **NachoMan** » Wed Oct 27, 2004 1:04 pm

On ya Tom!

JPC · Post by **JPC** » Wed Oct 27, 2004 4:27 pm

Well, that does it!

If TMZ says they're great, then they must be

I'm going to go and see them right away, even though I don't need anything done. :D

tmz_99 · Post by **tmz_99** » Wed Oct 27, 2004 8:49 pm

I cant be bribed

timkerin · Post by **timkerin** » Fri Oct 29, 2004 1:13 pm

I'm glad this is out in the open. I've had issues with them too.

Total cost keeps coming to more than he quotes, I've been pissed off with them many times and they take AGES to fix my car.

Can everybody please relate their experiences with RPW.

Cheers.

Austarion

Exhaust manifold repair

Exhaust manifold repair

exght

...

RPW

Who is online