Single Spinner to LSD
- SpidersWeb
- postwhore!
- Posts: 1984
- Joined: Wed Jan 28, 2004 2:29 am
- Location: Wellington, NZ
Single Spinner to LSD
My Starion is LSD-less, so I plan on buying a second hand Starion LSD, is it just a matter of unbolting one, and installing the other, or are there complications with this?
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
- Cookiemonster
- Mother Goose
- Posts: 3177
- Joined: Thu Jan 08, 2004 4:33 pm
- Location: Sydney
- SpidersWeb
- postwhore!
- Posts: 1984
- Joined: Wed Jan 28, 2004 2:29 am
- Location: Wellington, NZ
Ok I'll stick with JA/JB/JC models.
Thanks, I'll make sure I get that part as well. Might have a professional fit it if its only a quick job (done properly, plus wont cost much if its only an hour or so)
Thanks, I'll make sure I get that part as well. Might have a professional fit it if its only a quick job (done properly, plus wont cost much if its only an hour or so)
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
no JC models in australia mr web :P but your right about the pre JD diffs fitting.
oooh i'm getting an 'edited' remark on there! thats a first
oooh i'm getting an 'edited' remark on there! thats a first
Last edited by decoy on Thu Jan 29, 2004 3:42 pm, edited 3 times in total.
- SpidersWeb
- postwhore!
- Posts: 1984
- Joined: Wed Jan 28, 2004 2:29 am
- Location: Wellington, NZ
Install is here http://members.ozemail.com.au/~gillyfis ... tarion.htm
Click on LSD Install.
88/89 W/B won't fit cos U need half shafts to suit and they don't bolt up to 4 bolt wheels.
Almost anything else appaers to fit as long as you have the toque tube to suit it. JA torque tube is longer than JB/JD type
Or if you have JB/JD larger housing, you can put LSD centre in (if you know how of course)
Did you know you can use non genuine parts to rebuild an LSD centre??
Click on LSD Install.
88/89 W/B won't fit cos U need half shafts to suit and they don't bolt up to 4 bolt wheels.
Almost anything else appaers to fit as long as you have the toque tube to suit it. JA torque tube is longer than JB/JD type
Or if you have JB/JD larger housing, you can put LSD centre in (if you know how of course)
Did you know you can use non genuine parts to rebuild an LSD centre??
- SpidersWeb
- postwhore!
- Posts: 1984
- Joined: Wed Jan 28, 2004 2:29 am
- Location: Wellington, NZ
Cheers for that.
I'm debating buying an NZ Starion that has the LSD, and put it in my car, seen a couple of $500 jobs lying around. I'm beleiving that would be cheaper than importing from the US, or what a wrecker would charge, or using aftermarket diff internals.
What do you guys think?
I'm debating buying an NZ Starion that has the LSD, and put it in my car, seen a couple of $500 jobs lying around. I'm beleiving that would be cheaper than importing from the US, or what a wrecker would charge, or using aftermarket diff internals.
What do you guys think?
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
-
- I like starions more
- Posts: 198
- Joined: Thu Jan 08, 2004 11:12 pm
- Location: auckland, NZ
prehaps you could build a big parts canon, i live in 15acre lot so your targeting dosent have to be THAT good. just drop in a LSD and BOOM! should be at my house within seconds!! :D i can make a cash canon at my end that can launch wads of money back to you. or a brick if the parts arnt right!! :D
I figured out the meaning of life, and since then every day just gets worse.
Warranty void if stupid.
Warranty void if stupid.
- Cookiemonster
- Mother Goose
- Posts: 3177
- Joined: Thu Jan 08, 2004 4:33 pm
- Location: Sydney
Who is online
Users browsing this forum: No registered users and 0 guests