Most HP Using Standard Cam

[Cookiemonster]

Some of us aren't running the standard injection setup.

[pcuser51]

:D yes i do realise that cookie. what do you think about 230fwhp with
standard injectors

[flappa]

If I could make a suggestion here, could it be possible for some of these rwhp numbers to be attached to their relative dyno's. It might make it a bit easier for comparison.

[NXTIME]

The idea od a dyno day cam up again yesterday. I think that this is a great idea and I am sure that one can be arranged. I am willing to organise one for the Sydney Starions, that way we can get a more direct comparison of everyones engines.

[RiceThief]

I got 179 hp at wheels at 12 psi on a dyno dynamics dyno at redclifft dyno, this is with standard engine internals, but not the standard injection setup. 101kw at the wheels is about 140 kw at the engine.

[Jesusdroveawestfield]

What rpm was this figure reached at please and what about torque figure

[SIRIUS]

it doesnt show...only shows the speed it was reached...i have to go an find the sheet...didnt show the torque either..was just rwkw,speed an boost

[SIRIUS]

i think itll be a lil more that 140kw at the engine....when i was getting 93rwkw.... guy told me its about 200hp at the engine, which is exactly 150kw.... thats why i figured the power out put now to be 160kw at the engine.... i took my car to TURBO TUNE on south rd. they have been around for a long time, so gathered they would know.

[RiceThief]

I dont have the torque or rpm figures, but here is the dyno graph -



93kw at the wheels can never be 200 hp at the engine, say with a 30% drive train loss it would be approx 132.8kw at engine (93 / 0.7), 132.8 = 177 hp (132.8 / 0.75 or 132.8 x 1.34), this is based on the assumption that drivetrain loss is 30% which i dont think its this high on a rwd car, thus the above figure is best case scenario. I believe 101kw at wheels is about 140kw at engine as when i was making 101kw at wheels i couldnt keep up with a bluebird sss attesa, of course it was 4wd so it got me off the line but it kept on pulling away when traction wasnt an issue.

[SIRIUS]

damn...looks like i got a lot more things to do then...lol....so far my best ET is 14.8 @ 92mph

[Camotec]

well i think a dyno day would be good charlie cause i have no idea where my power is at, but i can haul ass against v8's and i beat a r33 gtst the other night. i need a better flowing cooler and some new pipes but i can do that once i find the right size cooler, i would like one the size of hoony's new one or there abouts just bar and plate style for more flow.

So organise away and we'll see what goes on!!

[NXTIME]

You sure you don't want one the size of mine? I will fit it for you :D


I will see how things pan out and when most if not all of the Sydney guys and girls have their cars ready. Would be good.

[Camotec]

Houw much charlie? what about one a little smaller maybe half that size of your maybe freezer size hehe no seriously how much?

Cheers

[NXTIME]

Wíll talk to you about it on Sunday.

Oh, and that niiiice JA that we were talking about has again dropped it's selling price. ;)

[Camotec]

Geez We have a bit to talk about heh

oooh ok i will have a squiz...

I am waiting for an answer on a moteh staz in perth but that is a long shot, not many people want to go to the trouble of shipping interstate.