3 piece spoiler
yeh its a stock thing! S2 JA, seen a few around. Andrew's old JA (now black) had 2tone dark blue on grey.
_
_________________
_________________
This has to be a stock thing. Top part of door trim same colour of dash, pillar trims, roof linings. top part of back seat.
the top colour matched the colour of dash. I wanted to keep it for GADGET but didn't want to ruin the door trims on the car at moment.
It seems a lighter cab with all grey and far easier to find replacement panels.
the top colour matched the colour of dash. I wanted to keep it for GADGET but didn't want to ruin the door trims on the car at moment.
It seems a lighter cab with all grey and far easier to find replacement panels.
Niiiiiice.. like the old NZ ODI shirts :DJPC wrote:My JA has a standard 2 tone interior too - brown and tan.
see http://www.beigebrigade.co.nz/
BTW, this doesn't mean I'm a closet Kiwi cricket supporter! :Djrod82 wrote:Niiiiiice.. like the old NZ ODI shirts :DJPC wrote:My JA has a standard 2 tone interior too - brown and tan.
see http://www.beigebrigade.co.nz/
I understand. If I saw someone driving around in a car with green and gold interior, I wouldn't assume they supported the Aussie cricketers, I would assume much worse LOLJPC wrote:jrod82 wrote:Niiiiiice.. like the old NZ ODI shirts :DJPC wrote:My JA has a standard 2 tone interior too - brown and tan.
BTW, this doesn't mean I'm a closet Kiwi cricket supporter! :D
- JustPaus_88TSi
- Dorifto!
- Posts: 67
- Joined: Thu Aug 05, 2004 7:46 am
- Location: Az, Usa
http://2.6liter.com/userfiles/StarQuester/DSCF1934.jpg
http://2.6liter.com/userfiles/StarQuester/DSCF1936.jpg
http://2.6liter.com/userfiles/StarQuester/DSCF1938.jpg
^^These came out too large for the screen.
On top of two tone colors, there's two tone fabrics aswell..
There's a good variety of color combo's that I didn't find pic's of..
Black leather outer/Gray cloth inner
Black leather outer/Blue cloth inner etc...
www.StarQuestClub.com
http://2.6liter.com/userfiles/StarQuester/DSCF1936.jpg
http://2.6liter.com/userfiles/StarQuester/DSCF1938.jpg
^^These came out too large for the screen.
On top of two tone colors, there's two tone fabrics aswell..
There's a good variety of color combo's that I didn't find pic's of..
Black leather outer/Gray cloth inner
Black leather outer/Blue cloth inner etc...
www.StarQuestClub.com
88TSI-nicely modded...
01 IS300, GTE swap, 60-1 Garrett, Tein, Volk CE28N etc...
those 3 piece spoilers are Horn. I would love to get my paws on one.
Though with alot of things for my car, in due time.
:D
Is it better to get a genuine one ie off a widebody or an equivalent ??
from working in the auto trade i know that you can get a good mould and then you can have a bad one. This means that the spoiler may not fit up correctly to all cars.
idea's????
:beer
Though with alot of things for my car, in due time.
:D
Is it better to get a genuine one ie off a widebody or an equivalent ??
from working in the auto trade i know that you can get a good mould and then you can have a bad one. This means that the spoiler may not fit up correctly to all cars.
idea's????
:beer
- el schmicko detailer -
-
- I love starions
- Posts: 409
- Joined: Mon May 24, 2004 9:31 am
- Location: US, California
- Contact:
Hello Guys
As we speak I am attempting to ship a 3 piece spoiler to a fellow member.
The problem is that the US Post Office has a limit on size as well. The MAX length for Surface shipping is 42 inches, the spolier is almost 52 inches.
So the problem is trying to get it passed without them measuring the box. NOT too easy but it can happen. This will be on a case by case basis and will ONLY take orders for ONE set at a time as I may end up stuck with all these spoilers I have no use for.
As of now Shipping to you guys in Australia and NZ is about US$50.00 and the cost for the full 3 piece spoiler set of a widebody Starion/Conquest is about US$100.00
So if the first set goes through with no problems I'll start taking orders. I cannot guarrantee color but I'll do my best to accomodate everyone.
Thanks
Oscar
Any questions you can reach me at ( oscardortega@yahoo.com )
As we speak I am attempting to ship a 3 piece spoiler to a fellow member.
The problem is that the US Post Office has a limit on size as well. The MAX length for Surface shipping is 42 inches, the spolier is almost 52 inches.
So the problem is trying to get it passed without them measuring the box. NOT too easy but it can happen. This will be on a case by case basis and will ONLY take orders for ONE set at a time as I may end up stuck with all these spoilers I have no use for.
As of now Shipping to you guys in Australia and NZ is about US$50.00 and the cost for the full 3 piece spoiler set of a widebody Starion/Conquest is about US$100.00
So if the first set goes through with no problems I'll start taking orders. I cannot guarrantee color but I'll do my best to accomodate everyone.
Thanks
Oscar
Any questions you can reach me at ( oscardortega@yahoo.com )
LSD & US Parts GUY
-
- I love starions
- Posts: 409
- Joined: Mon May 24, 2004 9:31 am
- Location: US, California
- Contact:
Yes that is correct.
Also if you want the third brake light to work you must make a hole in your hatch to run the wiring or you can try to squeeze it through the wiper hole.
But yes those Spoilers ARE boltedon as well as glued on. You must take the screws out and just use good grade industrial adhesive.
Oscar
Also if you want the third brake light to work you must make a hole in your hatch to run the wiring or you can try to squeeze it through the wiper hole.
But yes those Spoilers ARE boltedon as well as glued on. You must take the screws out and just use good grade industrial adhesive.
Oscar
LSD & US Parts GUY
Who is online
Users browsing this forum: No registered users and 11 guests